ZyXEL 793H Guía Del Usuario
Chapter 36 IP Routing Policy Setup
P-793H User’s Guide
347
36.7 IP Policy Routing Example
If a network has both Internet and remote node connections, you can route Web packets to the
Internet using one policy and route FTP packets to a remote network using another policy. See
the next figure.
Route 1 represents the default IP route and route 2 represents the configured IP route.
Internet using one policy and route FTP packets to a remote network using another policy. See
the next figure.
Route 1 represents the default IP route and route 2 represents the configured IP route.
Figure 240 IP Routing Policy Example
To force Web packets coming from clients with IP addresses of 192.168.1.33 to 192.168.1.64
to be routed to the Internet via the WAN port of the ZyWALL, follow the steps as shown next.
to be routed to the Internet via the WAN port of the ZyWALL, follow the steps as shown next.
1 Create a rule in Menu 25.1 - IP Routing Policy Setup as shown next.
Action
Specifies whether action should be taken on criteria Matched or Not Matched.
Gateway addr
Enter the IP address of the gateway to which the ZyXEL Device forwards the
packet. The gateway is an immediate neighbor of your ZyXEL Device and
must be on the same subnet as the ZyXEL Device, if it is on the LAN, or the IP
address of a remote node, if it is on the WAN. Enter 0.0.0.0 to specify the
default gateway.
Type of Service
Set the new TOS value of the outgoing packet. Prioritize incoming network
traffic by choosing No Change, Normal, Min Delay, Max Thruput, Max
Reliable or Min Cost.
Precedence
Set the new outgoing packet precedence value. Values are 0 to 7 or Don't
Care.
Log
Press [SPACE BAR] and then [ENTER] to select Yes to make an entry in the
system log when a policy is executed.
Table 132 Menu 25.1.1: IP Routing Policy (continued)
FIELD
DESCRIPTION