ZyXEL g-2000 plusv2 Guía Del Usuario
ZyXEL G-2000 Plus v2 User’s Guide
Chapter 2 Introducing the Web Configurator
45
C
H A P T E R
2
Introducing the Web
Configurator
This chapter describes how to access the ZyXEL device web configurator and provides an
overview of its screens. The default IP address of the ZyXEL device is 192.168.1.1.
overview of its screens. The default IP address of the ZyXEL device is 192.168.1.1.
2.1 Web Configurator Overview
The embedded web configurator allows you to manage the ZyXEL device from anywhere
through a browser such as Microsoft Internet Explorer or Netscape Navigator. Use Internet
Explorer 6.0 and later or Netscape Navigator 7.0 and later versions with JavaScript enabled. It
is recommended that you set your screen resolution to 1024 by 768 pixels.
through a browser such as Microsoft Internet Explorer or Netscape Navigator. Use Internet
Explorer 6.0 and later or Netscape Navigator 7.0 and later versions with JavaScript enabled. It
is recommended that you set your screen resolution to 1024 by 768 pixels.
2.2 Accessing the ZyXEL device Web Configurator
1 Make sure your ZyXEL device hardware is properly connected and prepare your
computer/computer network to connect to the ZyXEL device (refer to the Quick Start
Guide).
Guide).
2
L
aunch your web browser.
3
Type
"192.168.1.1" as the URL.
4
Type
"1234" (default) as the password and click Login.
5
You
should see a screen asking you to change your password (highly recommended) as
shown next. Type a new password (and retype it to confirm) and click Apply or click
Ignore.
Ignore.
Note: If you do not change the password, the following screen appears every time
you login.