ZyXEL g-2000 plusv2 Notas De La Versión
ZyXEL Confidential
2) Configure device with WPA2-PSK (WPA2) mixed mode, and STA1 (Intel 2200BG) configure with
WPA2-PSK (WPA2) and connect to device first, then STA2 (Conexant wireless card) configure with
WPA-PSK (WPA) try to connect with device, but STA2 always can't connect.
SPRID: 60428284
WPA2-PSK (WPA2) and connect to device first, then STA2 (Conexant wireless card) configure with
WPA-PSK (WPA) try to connect with device, but STA2 always can't connect.
SPRID: 60428284
6.
[FEATURE ENHANCED]
Extend share secrets of authentication and accounting from length 31 to 128.
SPRID: 60426109
Extend share secrets of authentication and accounting from length 31 to 128.
SPRID: 60426109
7.
[FEATURE ENHANCED]
Add a rule of default server (0.0.0.0) in address mapping.
SPRID: 60427229
Add a rule of default server (0.0.0.0) in address mapping.
SPRID: 60427229
Modification in 3.60(AAF.0)b3 | 04/20/2006
1.
1.
[BUG FIXED]
Symptom: System crash when user telnet in and modify configuration.
Condition: Copy a long character string (ex: 12345678901234567890123456789012), telnet to
G-2000plus v2, then paste the string in any item (Ex System name or domain name), system will crash.
SPRID: 60414066
Symptom: System crash when user telnet in and modify configuration.
Condition: Copy a long character string (ex: 12345678901234567890123456789012), telnet to
G-2000plus v2, then paste the string in any item (Ex System name or domain name), system will crash.
SPRID: 60414066
2.
[BUG FIXED]
Symptom: Conexant chipset wireless client (Mixed mode) can’t associate to G-2000plus v2 (802.11b
only mode).
Condition: In eWC->Advanced->Wireless: change 802.11 mode to 802.11b only, Setting Conexant STA
802.11 mode as b/g mixed mode, then STA can’t associate to G-2000plus v2.
SPRID: 60418320
Symptom: Conexant chipset wireless client (Mixed mode) can’t associate to G-2000plus v2 (802.11b
only mode).
Condition: In eWC->Advanced->Wireless: change 802.11 mode to 802.11b only, Setting Conexant STA
802.11 mode as b/g mixed mode, then STA can’t associate to G-2000plus v2.
SPRID: 60418320
3.
[BUG FIXED]
Symptom: Report function doesn’t work.
Condition: In eWC->Advanced->LOGS->Reports: press “Start Collection” to monitor “Web Site Hits”,
“LAN IP Address”, and “Protocol/Port”. Press “Refresh” to update the information, but nothing appears.
SPRID: 60418347
Symptom: Report function doesn’t work.
Condition: In eWC->Advanced->LOGS->Reports: press “Start Collection” to monitor “Web Site Hits”,
“LAN IP Address”, and “Protocol/Port”. Press “Refresh” to update the information, but nothing appears.
SPRID: 60418347
Modification in 3.60(AAF.0)b2 | 04/07/2006
1.
1.
[BUG FIXED]
Symptom: Mass 64 bytes packets will cause switch interrupt fail and doesn’t receive packets.
Condition: 1) Configure G-2000plus v2: NAT on, Firewall off, Quick Route 0x9bf2, Flow Control off.
2) Configure LAN to WAN performance test for SmartBits.
3) Under 64 bytes packets, Rx interrupt fail, and doesn’t receive packets.
SPRID: 060307557
Symptom: Mass 64 bytes packets will cause switch interrupt fail and doesn’t receive packets.
Condition: 1) Configure G-2000plus v2: NAT on, Firewall off, Quick Route 0x9bf2, Flow Control off.
2) Configure LAN to WAN performance test for SmartBits.
3) Under 64 bytes packets, Rx interrupt fail, and doesn’t receive packets.
SPRID: 060307557
2.
[BUG FIXED]
Symptom: WAN MAC Address Spoof failed.
Condition: In eWC->Advanced->WAN->MAC: when choose “Spoof this computer's MAC Address - IP
Address” and press applies, an error messages”Can not get the WAN MAC Address” occurred.
SPRID: 060307559
Symptom: WAN MAC Address Spoof failed.
Condition: In eWC->Advanced->WAN->MAC: when choose “Spoof this computer's MAC Address - IP
Address” and press applies, an error messages”Can not get the WAN MAC Address” occurred.
SPRID: 060307559
3.
[BUG FIXED]
Symptom: ZyAIR G-100 can’t associate with G-2000plus v2 when 802.11 mode is set to 802.11b only.
Condition: 1)In eWC->Advanced->wireless: choose “802.11 mode” as “802.11b only”.
2) Because preamble setting doesn’t match, some STA like “ZyAIR G-100” can’t associate successfully.
SPRID: 060309804
Symptom: ZyAIR G-100 can’t associate with G-2000plus v2 when 802.11 mode is set to 802.11b only.
Condition: 1)In eWC->Advanced->wireless: choose “802.11 mode” as “802.11b only”.
2) Because preamble setting doesn’t match, some STA like “ZyAIR G-100” can’t associate successfully.
SPRID: 060309804
4.
[BUG FIXED]
360AAF1C0.RTF
4/10