Sharp AR-M162 Guía Del Usuario

Descargar
Página de 160
57
COPY FUNCTIONS
4
TWO-SIDED COPYING OF ONE-SIDED ORIGINALS
• Paper sizes that can be used are 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, A3, B4, A4, A4R, 
B5, B5R and A5.
• Automatic two-sided copying is not possible when the bypass tray is used.
Copying from the SPF
1
Make sure that an original does not 
remain on the document glass, and 
then adjust the original guides to the 
width of your originals and place the 
originals face up in the document 
feeder tray.
If you placed an odd number of 
originals, the last copy will be 
one-sided.
2
Press the [DUPLEX] key.
The duplex mode selection 
screen appears.
3
Select "1 to 2" with the [
] or [
] key, 
or with the [DUPLEX] key.
4
If you wish to have the orientation of 
the image on the back of the copy 
paper be opposite the orientation of 
the image on the front, set "BINDING 
CHANGE" to "ON" with the [
] or [
key.
If the copies are to be bound at the top, reversing the 
orientations of the images on the front and back sides 
of each copy will result in a uniform orientation when 
the bound copies are viewed (note that this may 
depend on the orientation of the originals).
5
Press the [OK] key.
You will return to the base 
screen.
6
Set the number of copies and press 
the [START] key (
).
To stop copying in the middle of 
a run, press the [C] key.
O %
OUTPUT
DUPLEX
SPECIAL FUNCTI
MAT ORIGINAL SIZE DUPLEX SCAN
DUPLEX SCAN
ORIGINAL SIZE
CAST
 COPY MODE
   
1 to 1
   1 to 2
   2 to 2
GH
PQR
DUPLEX
SPECIAL FUNCTION
DUPLEX SCAN
 COPY MODE
   1 to 1
   
1 to 2
   2 to 2
BINDING CHANGE
 OFF
 COPY MODE
   1 to 1
   
1 to 2
   2 to 2
BINDING CHANGE 
ON
GHI
OK
BACK
WXYZ
Pegasus-E_Copy_Sec.book  57 ページ  2006年2月15日 水曜日 午後1時33分