Sharp MX-5500N Guía De Operación
16
Paper Tray Settings
Paper tray and paper type settings are explained in this section. Touch the [Paper Tray Settings] key to configure the
settings.
settings.
Tray Settings
These settings specify the paper type, paper size, and functions allowed for each paper tray.
When the [Tray Settings] key is touched, a list appears showing the trays and the current settings.
When the [Tray Settings] key is touched, a list appears showing the trays and the current settings.
Settings of each tray
Touch the [Change] key in the above screen to change the settings.
The following settings can be configured.
The following settings can be configured.
Item
Description
Type
Select the type of paper that is loaded in the tray.
The paper types that can be selected vary by paper tray. For more information, see
"
The paper types that can be selected vary by paper tray. For more information, see
"
" (page 17).
To store a new paper type, see "
" (page 18).
Size
Select the paper size from the list. The paper sizes that can be selected vary by tray.
The sizes that can be selected may also be restricted by the paper type selected
above. For more information, see "
The sizes that can be selected may also be restricted by the paper type selected
above. For more information, see "
If the desired size does not appear in the list, select [Custom Size] and directly enter
the size (only for tray 3 and the bypass tray). For more information, see "
the size (only for tray 3 and the bypass tray). For more information, see "
Feeding Approved Job
Select the modes that can be used. If there is a function that you do not wish to be
used with the selected tray, disable the function.
When the "Type" is other than plain paper, recycled paper, colored paper, or a user
type, [Fax] and [Internet Fax] cannot be selected.
used with the selected tray, disable the function.
When the "Type" is other than plain paper, recycled paper, colored paper, or a user
type, [Fax] and [Internet Fax] cannot be selected.
• If the paper size specified here is different from the size of paper that is loaded in a tray, a problem or misfeed may result
when printing.
To change the paper size in a tray, see "User's Guide".
To change the paper size in a tray, see "User's Guide".
• Paper properties such as "Fixed Paper Side" are automatically set when the paper type is selected. The paper tray
properties cannot be changed in this screen.
• If "
" (page 64) has been enabled in the system settings (administrator), the tray settings (except
for the bypass tray) cannot be configured.
Back
Change
Disable Punch
Disable Staple
Disable Duplex
Fixed Paper Side
Type
Plain
8-½x11
Tray Settings
Size
Tray 1
Doc. Filing
I-Fax
Fax
Print
Copy
Change
Disable Punch
Disable Staple
Disable Duplex
Fixed Paper Side
Type
Plain
8-½x11
Size
Tray 2
Doc. Filing
I-Fax
Fax
Print
Copy