Sharp XV-Z90U Guía De Operación

This function stores all items set in “Picture”. Five
settings can be stored separately in “Memory 1” to
“Memory 5”. Each stored setting is reassigned to each
input mode (INPUT 1 to INPUT 4 and DIGITAL).
Even when the input mode or signal is changed, you
can easily select optimal settings from the stored
settings.

• This function can be operated using the PICTURE SETTING

button on the projector or on the remote control, as well as
the OSD menu screen.

Settings of all items in “Picture” can be stored for
the respective input modes. The stored settings
can be selected in any input modes.

Besides “Memory 1” to “Memory 5”, other settings

can be stored for each input mode. “Memory OFF”
can be selected for each input mode.

1 Press PICTURE SETTING, Each time PICTURE

SETTING is pressed, the memory number
changes as shown below.

Memory 1

Memory 2

Memory 3

Memory OFF

Memory 5

Memory 4

1 Press MENU. The “Picture” menu screen

appears.

2 Press 

/

 to select “Picture Setting”, and then

press 

.

3 Press  /  to select the desired memory number

for the picture settings.

4 Press  ENTER to save the settings. Adjust the

settings described on pages 29 to 31. The values
that are adjusted are stored.

5 To exit the menu screen, press MENU.

1

2, 3

4

1, 5

XVZ90U(E)#p26_32.p65

20/8/02, 7:24 pm

32