Cortelco 6150 Guía Del Usuario
OPERATION
SETTING THE TONE/PULSE SWITCH (P/T)
Please ask you local telephone company whether your phone service is PULSE (Rotary) dialing or
TRUE TONE DIALING. Set the switch at T position for TONE type, or set the switch at P position
for PULSE (Rotary) type.
RINGER ON/OFF SWITCH
When you don’t want to be disturbed by incoming calls, slide the ringer switch on the base to the
“OFF” position, you can still use the phone to make out-going calls, but any in-coming call will not
activate the bell. Remember to return the switch to the “ON” position when you are ready to receive
calls.
Select the desired function of the bell ringer.
-OFF The ringer does not sound, for undisturbed privacy. Only on THIS PHONE, other phones in
your home will continue to ring normally.
-ON Normal setting rings on incoming calls.
RECEIVING CALLS AS A NORMAL TELEPHONE
When the phone rings
1 Lift the Handset and speak into the mouth piece of the handset.
2 Hang up the handset to release the telephone line when conversation is completed.
MAKING CALLS AS A NORMAL TELEPHONE
1 Select the desired dialing mode with the Tone/Pulse selector. (P/T)
2 Pick up the handset and listen for a dial tone.
3 Dial your call
LAST NUMBER REDIALING
The last number you called can be redialed using this telephone.
This is useful especially if line is busy.
1 To Redial last number, just press flash to get new dial tone then redial button.
2 This phone will remember the last number dialed even overnight. If you do not want anyone to
know which number you dialed last, pick up the phone and press any number, and hang up.
3 To redial numbers stored in memory, press the memory buttons (not redial).
STORING TELEPHONE NUMBERS INTO MEMORY LOCATIONS M1 OR M2 OR M3
NOTE: This phone has 3 one touch memories. This is very useful for emergency numbers or
numbers you call very often such as your parents or best friends. To use the one touch numbers just
get a dial tone and press one of the 3 buttons. To store a number into any of these 3 locations just
follow the instructions below. Remember to write the names you stored onto the memory index. We
suggest you write these in pencil so you can change them later.
STORING NUMBERS INTO MEMORY
To store numbers into the 3 one touch memory locations do the following:
1 Pick up handset – get dial tone.
2 Press store button once & release.
3 Dial number to be stored.
4 Press store button once & release.
5 Press M1 or M2 or M3 (location where you want the number stored)
6 Hang up phone, and go back to step #1 again to store other numbers.
EXAMPLE:
To store 5551212 into memory M2 do the following:
1 Pick up handset
2 Press store
3 Dial 5551212
4 Press store
5 Press M2
6 Hang up
TO DIAL FROM M1 OR M2 OR M3
1 Pick up handset for dial tone
2 Press M1 or M2 or M3
3 Your phone will dial the number you stored into M1 or M2 or M3 automatically.
EXAMPLE: Pressing M2 will dial (in Tone or Pulse) the number you stored in M2 to be dialed.
SETTING THE TONE/PULSE SWITCH (P/T)
Please ask you local telephone company whether your phone service is PULSE (Rotary) dialing or
TRUE TONE DIALING. Set the switch at T position for TONE type, or set the switch at P position
for PULSE (Rotary) type.
RINGER ON/OFF SWITCH
When you don’t want to be disturbed by incoming calls, slide the ringer switch on the base to the
“OFF” position, you can still use the phone to make out-going calls, but any in-coming call will not
activate the bell. Remember to return the switch to the “ON” position when you are ready to receive
calls.
Select the desired function of the bell ringer.
-OFF The ringer does not sound, for undisturbed privacy. Only on THIS PHONE, other phones in
your home will continue to ring normally.
-ON Normal setting rings on incoming calls.
RECEIVING CALLS AS A NORMAL TELEPHONE
When the phone rings
1 Lift the Handset and speak into the mouth piece of the handset.
2 Hang up the handset to release the telephone line when conversation is completed.
MAKING CALLS AS A NORMAL TELEPHONE
1 Select the desired dialing mode with the Tone/Pulse selector. (P/T)
2 Pick up the handset and listen for a dial tone.
3 Dial your call
LAST NUMBER REDIALING
The last number you called can be redialed using this telephone.
This is useful especially if line is busy.
1 To Redial last number, just press flash to get new dial tone then redial button.
2 This phone will remember the last number dialed even overnight. If you do not want anyone to
know which number you dialed last, pick up the phone and press any number, and hang up.
3 To redial numbers stored in memory, press the memory buttons (not redial).
STORING TELEPHONE NUMBERS INTO MEMORY LOCATIONS M1 OR M2 OR M3
NOTE: This phone has 3 one touch memories. This is very useful for emergency numbers or
numbers you call very often such as your parents or best friends. To use the one touch numbers just
get a dial tone and press one of the 3 buttons. To store a number into any of these 3 locations just
follow the instructions below. Remember to write the names you stored onto the memory index. We
suggest you write these in pencil so you can change them later.
STORING NUMBERS INTO MEMORY
To store numbers into the 3 one touch memory locations do the following:
1 Pick up handset – get dial tone.
2 Press store button once & release.
3 Dial number to be stored.
4 Press store button once & release.
5 Press M1 or M2 or M3 (location where you want the number stored)
6 Hang up phone, and go back to step #1 again to store other numbers.
EXAMPLE:
To store 5551212 into memory M2 do the following:
1 Pick up handset
2 Press store
3 Dial 5551212
4 Press store
5 Press M2
6 Hang up
TO DIAL FROM M1 OR M2 OR M3
1 Pick up handset for dial tone
2 Press M1 or M2 or M3
3 Your phone will dial the number you stored into M1 or M2 or M3 automatically.
EXAMPLE: Pressing M2 will dial (in Tone or Pulse) the number you stored in M2 to be dialed.
TO STORE A NUMBER INTO THE 10 TWO TOUCH MEMORY LOCATIONS – DO
THE FOLLOWING:
STORING TELEPHONE NUMBERS
NOTE: This telephone will store up to 16 digits in each memory position. Follow this simple
step by step method.
1 Pick up the handset to get a dial tone.
2 Press store button once & release.
3 Dial the number you want to store.
4 Press store button once & release.
5 Press a number from 1 to 0 (where you would like your number stored).
6 Hang up the phone.
7. Repeat steps 1 to 6 to store the remaining numbers.
EXAMPLE Suppose you want to store 555 1212 into memory 3
1. Pick up handset.
2 Press store button once & release
3 Dial 555 1212
4 Press store button once & release
5 Press 3
6 Hang up phone.
TO DIAL A NUMBER FROM MEMORY
1 Pick up receiver
2 Press AUTO and numerical button in which the number you want to dial is stored. The unit
will dial the number stored in the memory you selected automatically. EXAMPLE: Pressing
AUTO 2 will dial (in TONE or PULSE) the number you stored in 2 to be dialed.
DIALING NUMBERS STORED IN 10 NUMBER MEMORY
NOTE 1 Emergency calling is an important safety feature that should be used wisely. If you
decide to store emergency numbers into memory, use and label them carefully. If you want to
test emergency numbers you stored, please test them during non peak hours and tell the
emergency operator “this is a test” to avoid panic dispatching of help.
NOTE 2 If you move your phone to another room or disconnect the phone line, your stored
numbers will remain in the memory for a short time, so quickly reconnect it to the new jack, or
you will have to reprogram the memory numbers.
NOTE 3 If the operator comes on during storing numbers with the message “your phone is off
the hook”, ignore this. During storing of numbers, the circuit simulates an off hook condition.
This is normal. We suggest you program the numbers quickly to avoid operator messages.
NOTE 4 In case you want to change a number, simply store a new number, the old number will
automatically be erased.
THE FOLLOWING:
STORING TELEPHONE NUMBERS
NOTE: This telephone will store up to 16 digits in each memory position. Follow this simple
step by step method.
1 Pick up the handset to get a dial tone.
2 Press store button once & release.
3 Dial the number you want to store.
4 Press store button once & release.
5 Press a number from 1 to 0 (where you would like your number stored).
6 Hang up the phone.
7. Repeat steps 1 to 6 to store the remaining numbers.
EXAMPLE Suppose you want to store 555 1212 into memory 3
1. Pick up handset.
2 Press store button once & release
3 Dial 555 1212
4 Press store button once & release
5 Press 3
6 Hang up phone.
TO DIAL A NUMBER FROM MEMORY
1 Pick up receiver
2 Press AUTO and numerical button in which the number you want to dial is stored. The unit
will dial the number stored in the memory you selected automatically. EXAMPLE: Pressing
AUTO 2 will dial (in TONE or PULSE) the number you stored in 2 to be dialed.
DIALING NUMBERS STORED IN 10 NUMBER MEMORY
NOTE 1 Emergency calling is an important safety feature that should be used wisely. If you
decide to store emergency numbers into memory, use and label them carefully. If you want to
test emergency numbers you stored, please test them during non peak hours and tell the
emergency operator “this is a test” to avoid panic dispatching of help.
NOTE 2 If you move your phone to another room or disconnect the phone line, your stored
numbers will remain in the memory for a short time, so quickly reconnect it to the new jack, or
you will have to reprogram the memory numbers.
NOTE 3 If the operator comes on during storing numbers with the message “your phone is off
the hook”, ignore this. During storing of numbers, the circuit simulates an off hook condition.
This is normal. We suggest you program the numbers quickly to avoid operator messages.
NOTE 4 In case you want to change a number, simply store a new number, the old number will
automatically be erased.
Cortelco Rev. 1.1
LIMITED WARRANTY
If this product was purchased by you new in the U.S. or Puerto Rico, CORTELCO warrants it against defects in material and
workmanship for a period of one (1) year from the date of original purchase. This warranty is in lieu of all other express warranties.
During the warranty period, CORTELCO agrees to repair or, at its option, replace the defective product, or any part of it without
charge for parts or labor. This is your exclusive remedy. This warranty does not cover damage resulting from accident, misuse, abuse,
improper installation or operation, lack of reasonable care, the affixing of any attachment not provided by CORTELCO with the
product and loss of parts. The warranty is voided in the event any unauthorized person alters or repairs the unit.
Telephone companies use different types of equipment and offer various types of services to customers. CORTELCO does not
warrant that this product is compatible with the type of equipment of any particular phone company or the services provided
by it.
CORTELCO DISCLAIMS ANY IMPLIED WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AS OF THE DATE ONE YEAR FROM THE ORIGINAL PUR-
CHASE OF THE PRODUCT. CORTELCO ASSUMES NO RESPONSIBILITY FOR ANY SPECIAL, INCIDENTAL OR CONSE-
QUENTIAL DAMAGES.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM
STATE TO STATE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OFSPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.
If failure occurs and your 6150 is in warranty, service shall be provided by returning it to CORTELCO - Repair Center, 1703
Sawyer Road, Corinth, Mississippi 38834, shipping prepaid. The product will be repaired or replaced if examination by us
determines the product to be defective. Call Waiting IDs received damaged as a result of shipping will require you to file a claim with
the carrier.
workmanship for a period of one (1) year from the date of original purchase. This warranty is in lieu of all other express warranties.
During the warranty period, CORTELCO agrees to repair or, at its option, replace the defective product, or any part of it without
charge for parts or labor. This is your exclusive remedy. This warranty does not cover damage resulting from accident, misuse, abuse,
improper installation or operation, lack of reasonable care, the affixing of any attachment not provided by CORTELCO with the
product and loss of parts. The warranty is voided in the event any unauthorized person alters or repairs the unit.
Telephone companies use different types of equipment and offer various types of services to customers. CORTELCO does not
warrant that this product is compatible with the type of equipment of any particular phone company or the services provided
by it.
CORTELCO DISCLAIMS ANY IMPLIED WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AS OF THE DATE ONE YEAR FROM THE ORIGINAL PUR-
CHASE OF THE PRODUCT. CORTELCO ASSUMES NO RESPONSIBILITY FOR ANY SPECIAL, INCIDENTAL OR CONSE-
QUENTIAL DAMAGES.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM
STATE TO STATE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OFSPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.
If failure occurs and your 6150 is in warranty, service shall be provided by returning it to CORTELCO - Repair Center, 1703
Sawyer Road, Corinth, Mississippi 38834, shipping prepaid. The product will be repaired or replaced if examination by us
determines the product to be defective. Call Waiting IDs received damaged as a result of shipping will require you to file a claim with
the carrier.