SVP cdc-8630 Manual De Usuario
165mm+-2
1
2
2
m
m
+
-2
58
59
Under Macintosh Operating System (Mac 9.X or later)
Downloading Image(s) From Removable Disk
1. Turn on the PC.
2. Switch on the camera.
D ownloading I mage(s) T hrough U lead P hoto E xplorer
1. Turn on both the PC and switch on the camera. Connect the camera to the PC by USB
table and a new disk such as "Unlabeled" will be created automatically.
2. Start with Ulead Photo Explorer 8.5 SE Basic. The stored image(s) can be found in the
folder of DCIM \ 100MEDIA \. Please view the image(s) with double-clicks.
folder of DCIM \ 100MEDIA \. Please view the image(s) with double-clicks.
Error Message Table
CARD FULL
MEMORY FULL
CARD LOCKED
(ICON BLINKING)
(ICON BLINKING)
LOCK
NO IMAGE
FILE ERROR
MEMORY ERROR
CARD ERROR
LOW BATTERY !
(ICON BLINKING)
(ICON BLINKING)
There is insufficient card memory capacity
for storing an image.
There is insufficient internal memory capacity
for storing an image.
The SD card is under protection.
The Image can not be deleted under protection.
There is no image stored in the memory card or
built-in flash memory.
built-in flash memory.
File format error.
Memory is damaged or fails.
Card is damaged or fails.
Battery power is drained.
Delete the stored image(s) in the memory
card or insert a new memory card.
card or insert a new memory card.
Delete the stored image(s) in the flash memory.
Set the card protection switch at non-
protection position.
protection position.
Unlock the protected image.
Please take pictures or record movie clips.
Insert a new SD/MMC card or format the media.
Format the media.
Insert a new SD/MMC card
Insert new batteries.
Messages Causes Solutions
The environment is too dark in Flash off or "Night Scene''.
The environment is too dark in Flash off or "Night Scene''.
Appendix
LOW LIGHT!
HAND SHAKE ICON
Set the flash mode at Auto Flash or Fill-in Flash.
Avoid shake.
Set the flash mode at Auto Flash or Fill -in Flash.
Set the flash mode at Auto Flash or Fill -in Flash.
NO PAPER!
Paper has run out.
Please put more paper in the paper tray of the
Printer.
Printer.
PC Connection
3. Connect the camera to the PC by USB cable under any working mode. Please make sure
the USB cable is well connected to both the PC and camera.
the USB cable is well connected to both the PC and camera.
4. When the USB cable is connected to the PC, there will be a new icon named "untitled" showing on
the computer.
the computer.
5. Double click on the icon.
6. The stored image(s) can be found in the folder of DCIM \ 100MEDIA \.
7. View the image(s) with double-clicks.