Polaroid FLX-374 Manual De Usuario

ENGLISH

17

Chapter 2 Installing the LCD TV

 

METHOD A:

 

Use a supplied antenna cable to connect the NTSC signal to the LCD TV’s TV CABLE 

terminal.

 

METHOD B:

 

Use a supplied antenna cable to connect the ATSC signal to the LCD TV’s 

HDTV AIR terminal.

 

Connect the AC power cord at the back of the TV and connect the power cord to wall 

outlet.

 

Press the     button on the remote to turn on the LCD TV.

Always disconnect the LCD TV from the main voltage when the LCD TV will not be used for 
a long period of time. The POWER button on the front panel is only used for switching the 
LCD TV into standby, it does not disconnect the device from the main voltage. To 
completely disconnect the main voltage, please remove the power plug from the socket. 

 

Press the 

Input

 button on the remote to 

display the Input List. Use the 

▲► buttons to 

select TV( METHOD A), or HDTV (METHOD 
B), and press the OK button.

TV

CABLE

HDTV

AIR

VHF/UHF IN

A

B

TV

CABLE

HDTV

AIR

VHF/UHF IN

Input

 

TV(CABLE/AIR) 

 HDTV 

(CABLE/AIR)

 VIDEO1 

(SIDE)

 VIDEO2 

(REAR) 

 VIDEO3 

(S-VIDEO)

 VIDEO4 

(YPbPr1)

 VIDEO5 

(YPbPr2)

 VIDEO6 

(HDMI)

 COMPUTER 

(VGA)

 

This TV is equipped with a safety fuse.  In the event of an electrical storm or power outage the 

safety fuse is designed to protect your TV.  If your TV has no power, check the fuse by prying 
the cover off, following the illustration below. If the fuse is blown, visit your local hardware 
store and ask for a 4A 250V - 5x20mm Time Lag Fuse (Slow Blow) to replace the fuse.

D

NOTE: Unplug the AC power cord from the back of your TV before removing the fuse.