Crown ct-1600 Manual Suplementario

The Com Tech 200B amplifier was introduced in 1990.
Since then there have been several updates and
revisions, some of which called for new modules. The
following is a list of all modules used up to this date,
December 1995.

Output Modules: (left and right are identical)

Q42716-3
Original Output Module on P10233-8 or P10263-5
board.
Q42888-0
Output Module on P10315-3 board.
Q42969-8
Output Module on P10337-7 board. No longer avail-
able. Use Q43188-4 as service replacement.
Q43188-4
Output Module on P10396-3 board.

Q42774-2
Original B Version Main Module. This Module's parts
list is not documented. No longer available. Use
Q43128-0 as a service replacement.
Q42922-7
Main Module on D 7605-5 board. This Module's parts
list is not documented. No longer available. Use
Q23128-0 as a service replacement.
Q43013-4
Main Module on D 7911-7 board. This module is still
available at this time. If not, then use Q43128-0 as a
service replacement.
Q43044-9
Main Module on D 7993-5 board. No longer available.
Use Q43128-0 as service replacement.
Q43128-0
Main Module on D 8283-0 board.
Q43237-9
Main Module on D 8369-7 board. Detent Pots. Not
reverse compatible.

Q42762-7
CT-200/400 fan control on P10317-9 board.
Q43215-5
CT-200 fan control on P10404-5 board.
Q43244-5
CT control module for 120V, 60 Hz only. On P10405-2
board.
Q43242-9
CT control module for Export models. On P10405-2
board.

Q42706-4
CT display on D 7083-5 board.

The schematics provided are representative only. There
may be slight variations between amplifier to amplifier.
These schematics are intended to be used for trouble-
shooting purposes only.

For amplifiers with main boards D 7605-5, D 7911-7, D
7993-5, and D 8283-0 or earlier, refer to schematic
number J0552-3.

For amplifiers with main board D 8369-7 refer to sche-
matic number J0630-4.