Crown dsi 8m Guía Del Usuario

You will need to supply the following materials:
• Shielded audio cable for connecting the DSi 8M to the 
cinema processor and power amplifi er inputs
• Twisted wire for connecting the DSi 8M to non-DSi power-
amplifi er outputs
• Four 10-32 x 1/2” screws to mount the DSi 8M in the 
audio equipment rack
• Small standard screwdriver
• No. 2 Philips screwdriver
• Wire strippers

The ideal place for the DSi 8M Monitor Panel is in the sound 
rack or projector console between the stereo proces sor and 
power amplifi ers. DB25 and HD15 connectors are available 
on the back panel to make installation quick and easy. 
Alternatively, terminal blocks allow the use of stripped and 
tinned wire. They are pluggable for easy service and 
troubleshooting.

1. Connect to AC Power.
Connect the unit to the AC power outlet using the 
stan dard IEC cable provided. Any power source from 
100-240V     , 50-60 Hz will be suffi cient. Plug the 
Modular Power Supply into the Bypass Power input and 
into a power source that matches the Modular Power 
Supply requirements.
(continued)