Crown i-t4000 Guía Del Usuario

Typical input and output wiring is shown in Figure 2.8. 

INPUTS: Choose one of these options:

• Connect analog input wiring for both channels.

• Connect an AES/EBU digital signal to the AES/EBU connector.

OUTPUTS: Maintain proper polarity (+/–) on output connectors. Use 
Class 2 output wiring.

Figure 2.8 shows how to wire stereo speakers to the binding posts. Con-
nect Channel 1 loudspeaker’s positive (+) lead to Channel 1 positive 
(red) terminal of amp; repeat for negative (–). Repeat Channel 2 wiring 
as for Channel 1.

To wire stereo speakers to the Speakon

 

connectors, use one of these 

methods:

Method 1 (Table 1 and Figure 2.9): Wire one Speakon cable connector 
to two speakers. Insert the Speakon cable connector into the amplifier’s 
top Speakon connector.

Method 2 (Table 2 and Figure 2.10): Plug the Channel 1 speaker into the 
Channel 1 (top) Speakon connector, and plug the Channel 2 speaker 
into the Channel 2 (bottom) Speakon connector. 

PIN

1+

1–

2+

2–

CH

1+

1–

2+

2–

Stereo Wiring Method 1: Use Top Speakon Only

Table 1

PIN 1+

1–

CH

2+

2–

PIN 1+

1–

CH

1+

1–

Stereo Wiring Method 2: Use Both Speakons

Channel 1
Loudspeaker

Channel 2
Loudspeaker

Top Speakon
(Channel 1)

Bottom 
Speakon
(Channel 2)

Channel 1
Loudspeaker

Enceinte du
Canal 1

Lautsprecher
Kanal 1

Altoparlante 
del Canal 1

Channel 2
Loudspeaker

Enceinte du
Canal 2

Lautsprecher
Kanal 2

Altoparlante 
del Canal 2

Table 2

Top Speakon

Bottom Speakon