Crown ma-24x6 Guía Del Usuario
page 11
Macro-Tech MA-24X6 & 36X12 Power Amplifiers
Operation Manual
3.1 Precautions
Your Macro-Tech Series amplifier is protected
from internal and external faults, but you should
still take the following precautions for optimum
performance and safety:
from internal and external faults, but you should
still take the following precautions for optimum
performance and safety:
1. Before use, your amplifier first must be con-
figured for proper operation, including input
and output wiring hookup. Improper wiring
can result in serious operating difficulties.
For information on wiring and configura-
tion, please consult the Setup section of this
manual or, for advanced setup techniques,
consult Crown’s Amplifier Application
Guide available online at www.crownau-
dio.com.
and output wiring hookup. Improper wiring
can result in serious operating difficulties.
For information on wiring and configura-
tion, please consult the Setup section of this
manual or, for advanced setup techniques,
consult Crown’s Amplifier Application
Guide available online at www.crownau-
dio.com.
2.
Use care when making connections, select-
ing signal sources and controlling the out-
put level. The load you save may be your
own!
put level. The load you save may be your
own!
3.
Do not short the ground lead of an output
cable to the input signal ground. This may
form a ground loop and cause oscillations.
cable to the input signal ground. This may
form a ground loop and cause oscillations.
4. Never connect the output to a power
supply, battery or power main. Elec-
trical shock may result.
trical shock may result.
5.
Tampering with the circuitry, or making
unauthorized circuit changes, may be haz-
ardous and invalidates all agency listings.
unauthorized circuit changes, may be haz-
ardous and invalidates all agency listings.
6.
Do not operate the amplifier with the Signal/
IOC LEDs constantly indicating an IOC con-
dition.
IOC LEDs constantly indicating an IOC con-
dition.
7.
Do not overdrive the mixer, which will cause
a clipped signal to be sent to the amplifier.
Such signals will be reproduced with
extreme accuracy, and loudspeaker damage
may result.
Such signals will be reproduced with
extreme accuracy, and loudspeaker damage
may result.
3 Operation