Crown xls 202 Guia De Especificaciones

Crown International
1718 W. Mishawaka Rd.
Elkhart, IN 46517-9439
TEL: 574-294-8200
FAX: 574-294-8FAX
www.crownaudio.com

3/08                                                           139436-3B   

Crown offers a Three-Year, No-Fault, Fully Transferable Warranty for every new Crown ampli-
fi er—an unsurpassed industry standard. With this unprecedented No-Fault protection, your new 
Crown amplifi er is warranted to meet or exceed original specifi cations for the fi rst three years of 
ownership. During this time, if your amplifi er fails, or does not perform to original specifi cations, 
it will be repaired or replaced at our expense. About the only things not covered by this warranty 
are those losses normally covered by insurance and those caused by intentional abuse. And the 
coverage is transferable, should you sell your amplifi er.

See your authorized Crown dealer for full warranty disclosure and details. For customers outside 
of the USA, please contact your authorized Crown distributor for warranty information or call 
574-294-8200.

Specifi cations subject to change without prior notice. Latest 
information available at www.crownaudio.com.

Crown and Crown Audio are registered trademarks of Crown 
International. Other trademarks are the property of their 
respective owners. Printed in U.S.A.

© 2008 Crown Audio

®

, Inc.

Circuit Breaker: Back-panel breaker provides 
overload protection.

Mode Switch: Back-panel switch selects Dual or 
Bridge-Mono mode.

Signal Presence Indicators: Two green LEDs, 
one for each channel, illuminate when the 
channel’s input signal exceeds –40 dBu.

Clip Indicators: Two red LEDs, one for each 
channel, illuminate when the channel’s output is 
being overdriven.

Power Indicator: Blue LED indicates amplifi er 
has been turned on and AC power is available.

Fault Indicator: Two red LEDs, one for each 
channel, illuminate when amplifi er is in protect 
mode. Also illuminates briefl y during normal 
power-up when amplifi er is fi rst switched on.

Input Connectors: One per channel; back-
panel three-pin female XLR input connectors.

Output Connectors: Two 4-Pole Speakon

® 

Output Connectors accept 2-pole or 4-pole 
Speakon

®

 connectors. The top Speakon con-

nector is wired for both channels so it can 
be used for bridge-mono wiring or for stereo 

wiring of two speakers to a single Speakon 
connector.

One pair of back-panel binding posts per chan-
nel; accepts banana plugs or bare wire. (Euro-
pean models do not accept banana plugs.)

XLS Series amplifi ers provide extensive pro-
tection and diagnostic capabilities, including 
output current limiting, DC protection, circuit 
breaker, and thermal protection.

Ventilation: Flow-through ventilation from 
front to back.

Cooling: Internal heat sinks with forced-air 
cooling for rapid, uniform heat dissipation. 

Air Volume Requirements (per minute per 
unit): 80.15 ft³ (2.27 m³).

Dimensions (XLS 202, 402, 602, 802): EIA 
Standard 19-inch (48.3-cm) rack mount width 
(EIA RS-310-B), 3.5-inch (8.9-cm) height and 
15.2-inch (38.6-cm) depth.

Dimensions (XLS 5000): EIA Standard 19-inch 
(48.3-cm) rack mount width (EIA RS-310-B), 
5.25-inch (13.3-cm) height and 15.5-inch 
(39.5-cm) depth. 

Net Weight:
   XLS-202: 23.0 lb (10.4 kg)
   XLS-402: 25.7 lb (11.7 kg)
   XLS-602: 29.0 lb (13.2 kg)
   XLS-802: 35.5 lb (16.1 kg)
   XLS-5000: 62.0 lb* (27.7 kg)*

Shipping Weight:
   XLS-202: 28.0 lb (12.7 kg)
   XLS-402: 30.7 lb (13.9 kg)
   XLS-602: 34.0 lb (15.4 kg)
   XLS-802: 40.5 lb (18.4 kg)
   XLS-5000: 74.0 lb* (33.6 kg)*

*Preliminary