Brother HL-6050D Guía Del Usuario

3 - 4   CONTROL PANEL

Make sure the REPRINT setting is 

ON

 by using the control panel buttons to enter the SETUP menu. 

Press the Reprint button.

You can use this setting to reprint proof data that has just been printed and has no security settings. 
Documents that are placed in the proof area are available to anyone. You might use this setting for a 
document that will be moved to a public folder at a later date. 

When the area to spool data is full, the earliest data is automatically deleted first. The order of deleting 
data is not connected to the order of reprinting.

When you reprint Proof data, see How to print Secure data on page 3-6.

If you print with the driver we have supplied with the printer, the settings for Job Spooling in the 
printer driver will take priority over the settings made on the control panel. For more information, see 
Device Options on page 2-5.

If you wait too long to continue the control panel button operation, the display 
leaves the REPRINT setting automatically.

Press + twice.

Press Set or Reprint.

■

If you press the Go button twice, the printer will leave the REPRINT setting. 

■

If you want to reprint the data and have pressed the Go button, the display shows 

PRESS SET 

TO PRINT

. Press the Set or Reprint button to start reprinting, or press Go again to cancel the 

reprint job.

■

If you have not installed the optional CompactFlash

TM 

card, the reprint data will be deleted when 

the printer is turned off.

■

For more information about the settings in the printer driver, see Device Options on page 2-5.

COPIES=

1

COPIES=

3

PRINTING

COPIES=

1