Maytag mgd6600t Manual De Usuario

■

120 Volt, 60 Hz., AC only, 15- or 20-amp fused electrical supply is required. A time-delay 
fuse or circuit breaker is recommended. It is also recommended that a separate circuit 
serving only this dryer be provided.

Natural Gas:
This dryer is equipped for use with Natural gas. It is design-certified by CSA International for 
LP (propane or butane) gases with appropriate conversion.

■

Your dryer must have the correct burner for the type of gas in your home. Burner 
information is located on the rating plate in the door well of your dryer. If this information 
does not agree with the type of gas available, contact your dealer or call the phone 
numbers referenced on the front page of this manual.

LP gas conversion:
Conversion must be made by a qualified technician.
No attempt shall be made to convert the appliance from the gas specified on the model/serial 
rating plate for use with a different gas without consulting your gas company. For information 
on ordering an LP conversion kit, please refer to the “Assistance or Service” section. Ask for 
Part Number 49572.

■  

For a grounded, cord-connected dryer: 

This dryer must be grounded. In the event of malfunction or 
breakdown, grounding will reduce the risk of electric shock 
by providing a path of least resistance for electric current. 
This dryer is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug must 
be plugged into an appropriate outlet that is properly 
installed and grounded in accordance with all local codes 
and ordinances.

WARNING: 

Improper connection of the equipment-

grounding conductor can result in a risk of electric shock. 
Check with a qualified electrician or service representative 
or personnel if you are in doubt as to whether the dryer is 
properly grounded. Do not modify the plug provided with the 
dryer: if it will not fit the outlet, have a proper outlet installed 
by a qualified electrician.