Brother HL-8050N Manual De Usuario

CONTROL PANEL   4 - 2

You can control the basic printer operations and change various printer settings with nine buttons (Job 
Cancel, Go, 

, +, -, Set, Back, Reprint, Menu).

You can cancel the processing or printing of data with the Job Cancel button. The display shows 

JOB 

CANCELLING

 until the job is cancelled. After cancelling the job, the printer returns to the READY state.

When the printer is not receiving data or printing, the display shows 

NO DATA!!!

 

and you cannot cancel 

the job.

You can change the panel indications from the current status (Menu, Error and Reprint settings) by 
pressing the Go button once. For ERROR indications, the control panel only changes when the error is 
cleared.

You can pause printing with the Go button. Pressing the Go button again restarts the print job and clears 
the pause. During a pause, the printer is off-line.

If the printer is in PAUSE mode and you do not want to print the remaining data, you can cancel the 
job by pressing the Job Cancel button. Once the job has been cancelled the printer will return to the 
READY state.

Stop and cancel the printing job in progress.

Exit from the control panel menu, reprint settings and error messages.
Pause and continue printing.

Reprint the secure data.

Move forward through menus.
Move forward through the options you can choose.

Move backward through menus.
Move backward through the options you can choose.

Select the control panel menu.
Set the selected menus and settings.

Go back one level in the menu.

Reprint the last job received.

Go to the top menu (INFORMATION mode).