Brother HL-8050N Manual De Usuario
PRINTER DRIVER AND SOFTWARE 3 - 16
Automatic Emulation Selection
This printer has an Automatic Emulation Selection feature. When the printer receives data from the
computer, it automatically chooses the emulation mode. This feature has been set at the factory to ON.
computer, it automatically chooses the emulation mode. This feature has been set at the factory to ON.
The printer can choose from the following combinations:
You can select the emulation mode manually by using the control panel to access EMULATION in the
SETUP menu. See SETUP on page 4-14.
SETUP menu. See SETUP on page 4-14.
When you use the Automatic Emulation Selection, note the following:
■
The EPSON or IBM emulation mode priority must be selected, because the printer cannot
distinguish between them. Since the factory setting is EPSON emulation mode, you might need
to select the IBM emulation mode by using the control panel to access EMULATION in the
SETUP menu.
distinguish between them. Since the factory setting is EPSON emulation mode, you might need
to select the IBM emulation mode by using the control panel to access EMULATION in the
SETUP menu.
■
Try Automatic Emulation Selection with your application software or network server. If it does
not work properly, select the emulation mode manually by using either the printer control panel
buttons or the emulation selection commands from your software.
not work properly, select the emulation mode manually by using either the printer control panel
buttons or the emulation selection commands from your software.
EPSON (default)
IBM
HP LaserJet
BR-Script 3
HP-GL
EPSON FX-850
BR-Script 3
HP-GL
EPSON FX-850
HP LaserJet
BR-Script 3
HP-GL
IBM Proprinter XL
BR-Script 3
HP-GL
IBM Proprinter XL