Brother HL-8050N Manual De Usuario

4 - 9   CONTROL PANEL

The display shows the current printer status. When you use the control panel buttons, the display will 
change.

If you take the printer off-line, the display changes to show the emulation you have chosen.

If there are any problems, the display shows the appropriate error message, maintenance message or 
call service message so you will know that you need to take action. For more information about these 
messages, see What to Do When an Error Message Appears on page 5-15.

The following table shows the printer status messages that are displayed during normal operation: 

* Data that is being created exists, and no data is being received. Pressing the Go button performs 
FORM FEED and changes the display message to PRINTING.

READY

Ready to print.

PRINTING

Printing.

RESOLUTION ADAPT

Printing with reduced resolution.

PROCESSING

Busy processing data.

JOB CANCELLING

Cancelling the job.

PAUSE

The printer has suspended its functions. Pressing the Go

button starts the printer 

again.

WARMING UP

The printer is warming up.

SLEEP

In Sleep state

PRESS SET TO PRINT

Press the Set button to start printing.

RESET TO FACTORY 
SETTING

The printer setting returns to the factory settings.

SELF TEST

Performing self-diagnostics.

RAM SIZE=XX MB

This printer has XX MB memory.

NOW INITIALIZING

The printer is setting up.

PROGRAMING-WAIT

Accessing CompactFlash card.

IGNORE DATA

PS data is being read and disregarded.

DATA EXISTS 

(*)

Incomplete data exists.

COOLING DOWN

Wait for a few seconds until inside of the printer has cooled down.