Brother QL-1050 Manual De Usuario
Available Commands
59
)
Fonts and several bar codes are embedded within this printer. You can send commands to print embedded
characters and bar codes.
characters and bar codes.
Available Commands
Commands available are P-touch proprietary commands based on ESC/P.
For details, refer to the "Command Reference" included in the CD-ROM.
([CD Drive]:\Doc\Technical)
For details, refer to the "Command Reference" included in the CD-ROM.
([CD Drive]:\Doc\Technical)
Serial Cables
The pin assignments for the serial cables (RS-232C cables) which can be used with this printer are shown in
the table below. You can purchase the cables at an electronics store. Do not use cables exceeding 3 meters
in length.
the table below. You can purchase the cables at an electronics store. Do not use cables exceeding 3 meters
in length.
Brother QL-650TD/1050 side
PC side
(D-sub female, lock screw #4-40 inch screw)
(D-Sub9P female)
Controlling with the ESC/P Commands
• It is not possible to connect RS-232C cable and USB cable to the printer at the same time and use it.
Connect only one cable which is used to communicate with the printer.
• The RS-232C serial connector part of this equipment is not Limited Power Source.
Descriptions in this section apply only to the functions provided by the
Brother QL-650TD/1050/1050N.
Brother QL-650TD/
1050/1050N Only
Signal
Name
Pin
Number
Pin Assignments
Pin
Number
Signal
Name
DCD
1
1
DCD
RXD
2
2
RXD
TXD
3
3
TXD
DTR
4
4
DTR
GND
5
5
GND
DSR
6
6
DSR
RTS
7
7
RTS
CTS
8
8
CTS
RI
9
9
RI