Maytag MHW6000X Instruccion De Instalación
4
Floor drain system requires a Siphon Break Kit (Part Number
285834), 2 Connector Kits (Part Number 285835), and an
Extension Drain Hose (Part Number 285863) that may be
purchased separately. See “Alternative Parts”. Minimum siphon
break height: 28" (710 mm) from bottom of washer. (Additional
hoses may be needed.)
Minimum diameter for a standpipe drain: 2" (51 mm). Minimum
carry-away capacity: 17 gal. (64 L) per minute. A
1
/
4
" (6 mm)
diameter to 1" (25 mm) diameter Standpipe Adapter Kit is
available (Part Number 3363920). Top of standpipe must be at least
30" (762 mm) high; install no higher than 96" (2.44 m) from bot-
tom of washer. If you have an overhead sewer and need to pump
higher than 96 inches, a sump pump and associated hardware are
needed. See “Alternative Parts”.
Wall standpipe drain system
Laundry tub drain system
Minimum capacity: 20 gal. (76 L). Top of laundry tub must
be at least 30" (762 mm) above floor; install no higher than
96" (2.44 m) from bottom of washer.
4
1
/
2
"
(113 mm)
Floor standpipe drain system
4
1
/
2
"
(113 mm)
See requirements for floor standpipe drain system.
30"
(762 mm)
min.
4
1
/
2
"
(113 mm)
Floor drain system
DraIN sysTeM
Drain system can be installed using a floor drain, wall standpipe,
floor standpipe, or laundry tub. Select method you need.
IMPORTANT:
To avoid siphoning, only 4.5" (113 mm) of drain
hose should be inside standpipe. Always secure drain hose with
beaded tie strap.