Delorme pn-30 Guía Del Usuario

62

To open the Device Setup Page, from any page go to 
MENU > Device Setup. If you have added the Device 
Setup Page to the PAGE button sequence, it is no longer 
available on menus. Press the PAGE button until it appears.

Use the Device Setup Page options to modify the default 
settings on the PN-Series GPS. You can also view and 
manage internal and SD card memory use and restore the 
device’s default system settings. 

Use the System options to modify GPS/WAAS settings, 
select the battery type, enable/disable USB power, and 
view and manage memory information.

From any page, go to MENU > Device Setup > System

Use the drop-down lists to select system settings.

»

–Normal GPS use.

»

–Turns off backlight after 15 seconds  

  and reduces processor speeds.

»

–Turns off GPS satellite tracking. See  

  To disable GPS on page 13.

»

–Enables Demo Mode. See To view or  

  hide Demo Mode on page 4.
WAAS

–Select Enabled or Disabled. See GPS and  

  WAAS Status on page 13.

–Select Alkaline, Lithium, NiMH, or  

  Li-ion (Rechargeable)—use only DeLorme Li-ion  
  batteries. See Installing the Batteries on page 2.

–Select Enabled or Disabled to determine  

  if the device can receive power from a computer  
  USB port.

You can view how much space is available on the device's 
internal memory or an SD card in the device.

From any page, go to MENU > Device Setup > System > 
Memory Use.

You can view:

Internal memory use

 

SD card memory use

 

 

The Device Setup Page