iRobot 510 Guía Del Usuario

Descargar
Página de 28
12
iRobot Roomba 500 Series
 
Virtual Walls
®
 
(included with Models 510 - 530)
The iRobot Roomba Virtual Walls create an invisible barrier that Roomba will
not cross. This invisible barrier can be used to confine Roomba to a particular 
room or area, and prevent it from getting too close to electrical or computer 
cords, delicate objects on the floor, etc. 
The Virtual Walls can be set to block an area up to eight feet long or longer, in 
three-step increments: 0-3 ft., 4-7 ft., 8+ ft. Note that the width of the Virtual 
Walls’ beam also increases as its length increases, creating a cone-shaped 
area which Roomba cannot pass. The Virtual Wall also creates a halo of 
protection around itself, preventing Roomba from getting too close.
 
  
 
 
 
D Alkaline 
Batteries
(not included)
Battery
Door
Distance
Range
Battery Installation 
The Virtual Wall requires two “D”
alkaline batteries and 
automatically shuts off after 135 
minutes. If the power light blinks 
green, the batteries will soon 
need
to be replaced.
Range Adjustment
Use the slider bar to adjust
the length of the barrier. A
longer range will drain the 
battery faster.
TIP:  Point the iRobot Roomba logo on the Virtual Wall towards the area you 
would like to block.
TIP:  For best performance, place the Virtual Wall on the outside of the doorway 
you wish to block. Set the Virtual Wall to the shortest setting possible to 
extend the Virtual Wall battery life.
Additional Virtual Walls may be purchased at www.irobot.com.
Virtual Walls are compatible with all 500 Series Roomba vacuuming robots.