OKI B2500 Guía Del Usuario

- 62 -

You have the choice between:
• waiting until the transmission takes place at the given 

time,

• restarting the transmission immediately by 

pressing 

,

• abandoning transmission by pressing 

. To eject the 

document, press 

 again.

You have the choice between:
• waiting until the transmission takes place at the given 

time,

• restarting the transmission using the transmission 

queue. In this case, for a document composed of 
several pages, the transmission will take place from 
the page where the error occured,

• abandoning the transmission by deleting 

the 

corresponding command in the transmission line.

The terminal makes at most 5 automatic redials. The non-
transmitted document is automatically deleted from the 
memory and a transmission report is then printed together 
with an error code and the cause for transmission failure 
(see the communication error codes).

The communication error codes appear in the logs and 
transmission reports.

Code 01 - Busy or no fax answer
This code appears after 6 unsatisfactory attempts. Call 
later.
Code 03 - User break
A communication has been stopped by the user pressing 

the key 

.

Code 04 - Non programmed number
A number saved as a one-touch key or abbreviated 
number is not valid, check it. (Example: a delayed 
transmission was programmed with a one-touch key and 
this key has been deleted in the meantime).
Code 05 - Scanning default
An incident occurred with the scanner, for example, the 
sheet is jammed.
Code 06 - Printer default
An incident occurred in the printer: no paper, paper jam, 
opened cover... In the reception mode, this incident 
appears only if the reception parameter is switched to 
W

.

Code 07 - Disconnected
The link has been cut (bad line). Check the number and 
try again.
Code 08 - Quality
The document you sent was not well received. Contact 
your subscriber to see if you need to send again.

Code 0A - No document to be polled
You tried to poll a document from a subscriber who had 
not prepared his document (no deposit) or the password 
entered was incorrect.
Code 0B - Wrong number of pages
There is a difference between the number of pages 
indicated during preparation for the transmission and the 
number of pages sent. Check the number of pages in the 
document.
Code 0C - Received document error
Ask the subscriber who called you to check the length of 
his document (it may be too long to be completely 
received).
Code 0D - Transmission failed
Ask the sender to resend the document.
Code 13 - Memory full
Your fax can no longer receive since its memory is full. 
There are too many received unprinted documents or too 
many documents in the transmission line.
Print the received documents and delete or transmit 
immediately the documents in the transmission line.
Code 14 - Memory full
Received document memory full. Print all received 
documents.
Code 15 - Unknown mailbox number
You wish to deposit a document in a subscriber’s mailbox. 
The mailbox number does not exist.
Code 16 - No Relay Bcst  list  Nr x
You requested a document relay from a remote fax but 
the fax has not programmed the list of subscribers 
requested.
Code 17 - Unknown mailbox number
You wish to recover a document from a subscriber’s 
mailbox. The mailbox number does not exist.
Code 18 - Relay Bcst impossible
You requested a document relay from a remote fax which 
does not have the relay broadcast function.
Code 19 - Subscriber has stopped
The communication has been stopped by your 
subscriber. (Example: a fax wanted to poll your fax but 
there is no document deposited).
Code 1A - Disconnected
The transmission has not started. The telephone line is 
busy.
Code 1B - Transmission failed
During transmission: start again.
During reception: ask your subscriber to resend the 
document.
Code 50 - Server error
Check the number configured for the SMS server or a 
communication error occured during data transmission.