OKI MC860 MFP Manual De Usuario

Getting started > 21

The multi purpose tray can handle the same media sizes as the cassette trays but in 

weights up to 53 lb. US Bond (200 g/m²) [Ultra heavy]. For very heavy paper stock, use 

the face up (rear) paper stacker. This ensures that the paper path through the unit is 

almost straight.
The multi purpose tray can feed paper widths as small as 3.9 inches (100 mm) and lengths 

up to 47.25 inches (1200 mm) for banner printing.
For paper lengths exceeding 17 inches (431.8 mm) use paper stock up to 34 lb. US Bond 

(128 g/m² ) and the face up (rear) paper stacker.
Use the multi purpose tray for printing on envelopes and transparencies. Up to envelopers 

or 50 sheets of transparencies can be loaded at one time, subject to a maximum stacking 

depth of about 3/8” (10 mm).
Watermarked, headed paper or transparencies should be loaded print side up and top edge 

into the unit. Do not use the duplex (two-sided printing) function.

The face down stacker on the top of the unit can hold up to 250 sheets of 20-;b/ US Bond 

(75 g/m²) standard paper and can handle paper stocks up to 47-lb. US Bond (176 g/m²). 

Pages printed in reading order (page 1 first) will be sorted in reading order (last page on 

top, facing down).

The face up stacker at the rear of the unit should be opened and the tray extension pulled 

out when required for use. In this condition paper will exit via this path, regardless of driver 

settings.
The face up stacker can hold up to 100 sheets of 20-lb/ US Bond (75 g/m²) standard paper, 

and can handle stocks up to 53-Lb. US Bond (200 g/m²).
Always use this stacker and the multi purpose feeder for paper stocks heavier than 47-lb. 

US Bond (176 g/m²).

The duplex unit provides automatic two-sided printing on the same range of paper sizes as 

tray 2 (i.e. all cassette sizes except A6), using paper stocks from 17 to 28-lb. US Bond 

(64-105 g/m²).