OKI C710DN Guía Del Usuario

Enable HDD

Yes
No

Even if a machine is inoperable at 
installation because of a faulty HDD, the 
machine can be made operable by setting 
this parameter to No (ignores the existence 
of the HDD).
When No is set, access to a HDD results in 
FAIL because the HDD is regarded as not 
attached.
After setting change and exit from the 
menu, the printer will restart.

Erase HDD

Execute

Deletion of all data stored in the hard disk. 
DoD 5220.22-M sanitizing formula is used 
for clearing the desk. The machine will 
restart after changing setup. The following 
message appears after pressing the Enter 
switch.
Are You Sure?  Yes / No
NO = return to the source menu
Yes = the procedure for clearing disk stars 
immediately after the machine reboots.
If the Cancel button is held down during 
erasing, the following confirmation 
messages will appear to discontinue 
processing.
Do You Wish to Cancel?  Yes / No
NO= procedure will continue.
YES = procedure will discontinue. 

Enable 
initializatio
n

No
Yes

Prevents a setting change accompanying 
initialization of Block Device (HDD,FLASH).