OKI B4300 Guía Del Usuario

PAPER RECOMMENDATIONS > 40

PAPER FEED, SIZE AND MEDIA SETTING

The process used to fuse (fix) the printed image to the paper involves a 
mixture of pressure and heat. Too much heat will cause lightweight paper 
to crease or curl, and corrugations in transparencies. Too little heat will 
cause the image not to fuse fully into heavyweight paper.

B4200

The print quality for different types of paper is adjusted by changing the 
media type as follows:

1.

Start the Status Monitor.

2.

Click on [Printer Setup] tab - [Printer Menu] button - [Paper] tab. 
Click on the button for the paper tray being used. Adjust the 
media type to the required setting and, if necessary, the paper size 
to the size of the paper being used.

3.

Click on the [Apply] button, [Close] button then [OK] button to 
set the printer to the new media type and printing quality.

Printing transparencies

When printing transparencies, the manual feed must be used and the 
media type changed to transparencies as follows

:

1.

Open the manual feed on the printer and place the transparency 
face up between the paper guides.

2.

Adjust the paper guides to the width of the transparency.

NOTE

Although media properties can be set in the printer driver for particular jobs, 
when filling a tray with media it is recommended that you manually set the 
printer to match the media as described here.

CAUTION!

Damage to the printer may occur if the incorrect setting is used when 
printing transparencies.