OKI B930DN Guía Del Usuario
Troubleshooting > 50
The correct
characters are not
printed (printing
garbage).
characters are not
printed (printing
garbage).
The printer is printing with non-standard built-in fonts. Check the fonts
used in the application. Download the necessary fonts when using
PostScript.
used in the application. Download the necessary fonts when using
PostScript.
The printout is
different from what
is displayed on the
screen.
different from what
is displayed on the
screen.
Did you change the TrueType font settings to printer fonts? Change to
TrueType font printing for Font Substitution on the Setup tab of the
printer driver.
Online Help for the printer driver
TrueType font printing for Font Substitution on the Setup tab of the
printer driver.
Online Help for the printer driver
The light of the
<READY> indicator
is on and blinking
but there is no print
output.
<READY> indicator
is on and blinking
but there is no print
output.
There are jobs remaining in the printer. Cancel printing or force the
remaining data to be printed.
To forcibly print the job, press the <ON LINE> button to set the printer
in off-line mode, then press the <FEED/SELECT> button. After the job
has been printed, press the <ON LINE> button again to return the
printer to online mode.
When a parallel/USB port is used, data may be transmitted in the
middle of a job depending on when the <ON LINE> button is pressed.
In this case, subsequent print data received after the <FEED/SELECT>
button is pressed, will be recognized as a new job. The data will be
printed after the off-line mode has been cancelled. Furthermore, it may
not be printed properly.
Cancelling printing:
remaining data to be printed.
To forcibly print the job, press the <ON LINE> button to set the printer
in off-line mode, then press the <FEED/SELECT> button. After the job
has been printed, press the <ON LINE> button again to return the
printer to online mode.
When a parallel/USB port is used, data may be transmitted in the
middle of a job depending on when the <ON LINE> button is pressed.
In this case, subsequent print data received after the <FEED/SELECT>
button is pressed, will be recognized as a new job. The data will be
printed after the off-line mode has been cancelled. Furthermore, it may
not be printed properly.
Cancelling printing:
Printing is very
slow.
slow.
The receive buffer is insufficient. When printing documents of high
resolution, reduce the memory capacity of items not in use.
It is recommended to disable ports not in use, and channel the memory
to other purposes.
resolution, reduce the memory capacity of items not in use.
It is recommended to disable ports not in use, and channel the memory
to other purposes.
Is the printer driver set to 1200dpi on the Graphics tab? Changing
the setting to 600dpi will shorten the print time.
For guidance refer to the online help in the printer driver.
the setting to 600dpi will shorten the print time.
For guidance refer to the online help in the printer driver.
Printing with TrueType fonts may take up printing time. Change the
printing method for TrueType fonts in Specify Font on the Detailed
Settings tab of the printer driver.
For guidance refer to the online help in the printer driver.
printing method for TrueType fonts in Specify Font on the Detailed
Settings tab of the printer driver.
For guidance refer to the online help in the printer driver.
Top section of
printed document is
missing.
Text is reduced.
printed document is
missing.
Text is reduced.
Are the paper tray guides set in the correct positions?
Set the length guide and the right width guide in the correct positions.
Set the length guide and the right width guide in the correct positions.
SYMPTOM
REASON/ACTION