OKI C6150 Guía Del Usuario
C6150 User’s Guide
99
USB Menu
Note: Factory default settings are shown in bold.
Network Menu
Note: Factory default settings are shown in bold.
Item
Settings
Explanation
SOFT RESET
ENABLE
DISABLE
DISABLE
Enables or disables the SOFT RESET
command.
command.
SPEED
480Mbps
12Mbps
12Mbps
Sets the maximum transfer speed
for the USB interface.
for the USB interface.
SERIAL
NUMBER
NUMBER
ENABLE
DISABLE
DISABLE
ENABLE allows your computer to
identify the printer by its USB
interface serial number.
identify the printer by its USB
interface serial number.
Item
Settings
Explanation
TCP/IP
ENABLE
DISABLE
DISABLE
Enables or disables this network
protocol.
protocol.
NETBEUI
ENABLE
DISABLE
DISABLE
Enables or disables this network
protocol.
protocol.
IP ADDRESS
SET
SET
AUTO
MANUAL
MANUAL
Change this to Manual to specify the IP
address through the front panel (see
next entry). Required for non-DHCP
networks.
address through the front panel (see
next entry). Required for non-DHCP
networks.
IP ADDRESS
xxx.xxx.xxx.xxx
Default =
198.168.100.100
Default =
198.168.100.100
Current assigned IP address. To
change:
• Press ENTER.
• Use
change:
• Press ENTER.
• Use
+
/
–
keys to increment first
octet.
• Press ENTER to move on to the next
octet.
• Repeat for each octet.
• Press ENTER to register the new
• Press ENTER to register the new
address.
SUBNET MASK
xxx.xxx.xxx.xxx
Default =
255.255.255.000
Default =
255.255.255.000
Current assigned subnet mask. To
change, proceed as above.
change, proceed as above.
GATEWAY
ADDRESS
ADDRESS
xxx.xxx.xxx.xxx
Default =
192.168.100.254
Default =
192.168.100.254
Current assigned gateway address. To
change, proceed as above.
change, proceed as above.
Factory Default [EXECUTE]
Initializes the network card.