OKI c3530 Guía Del Usuario

C3530 MFP User’s Guide

Configuring your machine > 37

In the top level screen, scroll down to Menu and select 
using the Enter key.

In the drop down menu, scroll down to the Admin Menu 
and select using the Enter key. Enter the password

In the drop down menu, scroll down to Fax Setup and 
select using the Enter key.

In the drop down menu, scroll down to Basic Setup and 
select using the Enter key.

In the drop down menu, scroll down to the Ring 
Response and select using the Enter key.

In the drop down menu, scroll down to the response time 
required and select using the Enter key.

Using the Left arrow key, return to the top level menu.

The operation and functionality of this machine can be limited to 
authorised personnel only by the simple introduction of a 4-9 
digit PIN (Personal Identification Number). This is known as 
Access Control. The greater the number of digits in the PIN - the 
more secure it is.

Access Control Enable/Disable is switched in Menu 
>Admin Setup>System Setup>Access Control.

With Access Control set to Enable, the display reverts to 
the System Setup screen immediately following the 
setting change. If one of the functions such as Print, Fax 
Send or PC Scan is running however, the display will only 
revert to the System Setup screen when the task has 
been completed.

With Access Control Enabled, entering a PIN ID is 
required to enable setting up various utilities. 

Enter the PIN ID via the Ten Key pad.