Philips 37 Manual De Usuario

15

If your TV has only a single Antenna Input 
jack (labeled as 75 ohm or RF In,) you 
will need an RF modulator in order to 
view the DVD playback on the TV.  See 
your electronics retailer or contact 
Philips for details about RF modulator 
availability and operations.

A

 Use the supplied composite video cable 

(yellow) to connect the main unit’s 
VIDEO OUT jack to the video input 
jack on the RF modulator.

B

 Use an RF coaxial cable (not supplied) to 

connect ANTENNA OUT or TO TV jack 
on the RF modulator to the ANTENNA 
IN jack on the TV.

C

 Connect the Antenna or Cable TV 

service signal to the ANTENNA IN or RF 
IN jack on the RF modulator.  (It may 
have been connected to your TV 
previously.  Disconnect it from the TV.)

The progressive scan video quality is only 
available when using Y Pb Pr connection 
and a progressive scan TV is required. It 
provides superior picture quality when 
watching DVD movies.

A

 Use the component video cables (red/ 

blue/green - not supplied) to connect the 
COMPONENT VIDEO OUT 
(Y Pb Pr) jacks on the main unit to the 
corresponding component video input 
jacks (or labeled as Y Pb/Cb Pr/Cr or 
YUV) on the TV.

B

 If your TV accepts progressive signals, 

proceed to chapter ‘Getting Started - 
Setting up Progressive Scan feature’ for 
detailed progressive feature setup.

Option 3

TV

Rear of an RF modulator 

(example only)

Option 4