PRIMERA ii Guía De Instalación Rápida
2
1
Unpack Your Printer
• Optical Disc Printer
• Gray Plastic Input and Output Bins
• Switching Power Supply with Power Cord
• One Three-Color (CMY) Ink Cartridge
• One Monochrome Black Ink Cartridge
• QuickStart Installer Disc
• USB 2 Interface Cable (Beige)
• Warranty Card
• This Operator's Manual, Quick Start Guide
• Gray Plastic Input and Output Bins
• Switching Power Supply with Power Cord
• One Three-Color (CMY) Ink Cartridge
• One Monochrome Black Ink Cartridge
• QuickStart Installer Disc
• USB 2 Interface Cable (Beige)
• Warranty Card
• This Operator's Manual, Quick Start Guide
and Other Printed Information
Save the carton and packing materials. They
will come in handy later if you ever need to
transport the Publisher and/or any of its parts
and accessories.
3
Applying Power
Be sure you have removed the packing tape and
cardboard insert prior to applying power.
• Locate the power adapter supplied with
• Locate the power adapter supplied with
your Printer.
• Place one end of the adapter cord into the
power port on the rear panel of the
Printer.
• Unit will initialize for approximately
30 seconds.
4
Loading Media (Discs)
Refer to the following steps when loading discs in to the Printer:
• Open the front cover of the Printer
• The Printer will automatically position the cartridge carrier
• Open the front cover of the Printer
• The Printer will automatically position the cartridge carrier
and Robotic Disc Transporter to the center position allowing
for easy access to the bins.
• Load the Input Bin (the bin located on the right-hand side of
the Publisher) with 25 blank discs and place the bins on the
mounting pegs.
1. Place the Installer CD in
your CDRom Drive. The
Installer application will
automatically launch in
a few moments.
2. Click
Standard Install to
begin the installation.
You may follow either the steps shown in
this Quick Start or the steps shown in the
installer to complete the installation.
Note:
If the Installer does not start, open My
Computer on your desktop. Double-click the
icon of the appropriate CD drive containing
the Software Installer disc. Double-click
Installer.exe.
Installing the Software
PC
Mac
1. Insert the Installation
CD-ROM in your system's
CD-ROM drive.
2. Double-click the
CD-ROM icon.
3. Double-click on the Disc
Publisher Installer.mpkg
file icon. Follow the on-screen instructions.
NOTE: Your Printer can print directly onto virtually any brand of printable-
surface CD/DVD media. However, different brands of discs have different
printable coatings. Because of this, you may need to adjust the printer
driver settings to accommodate your specific brand of CD/DVD media.
Refer to Section 3D or 4D for further printer driver information.
For maximum print quality, use CD/DVD media authorized by Primera.
For maximum print quality, use CD/DVD media authorized by Primera.
5
Installing Ink Cartridges
• Press the Ink Cartridge Button to move
the Ink Cartridge Carrier to the load position
and open the ink cartridge covers
• Remove each ink cartridge from its packaging
• Slowly remove the tape
• Slowly remove the tape
covering the cartridge's print
head, being careful to avoid
damaging the barcode label
on the underside of the
cartridge.
DO NOT TOUCH THE COPPER AREA!
• Insert the ink cartridges into the carrier,
copper end first and snap the cartridge cover
in place. Insert the color in the left holder,
monochrome black in the right cartridge
holder.
• Close the Publisher’s front cover.
1
2
1. Push in
2. Lift Up
2. Lift Up
Color
Black
6a
Installing the Printer Driver (Windows Vista)
Click the "Install Driver" button when prompted to do so
by the installation disc.
Files will begin to copy to your hard drive.
You will be prompted that Windows can't verify the
Files will begin to copy to your hard drive.
You will be prompted that Windows can't verify the
publisher of this driver software. Click Install the driver
software anyway.
Finally, connect the Publisher to your PC with your beige
Finally, connect the Publisher to your PC with your beige
USB 2.0 Cable.