Netcomm np3680 Guía Del Usuario

4.4  Adding Network Printers in Windows

Follow the instructions below to use the standard Windows Add Printer Wizard and the Control Center for 
adding a network printer in Windows 98 SE, ME, 2000, XP and 2003. 

Note:

1.  Before adding a network printer, you are advised to install the local Windows printer driver in

advance.

2.  Before using network printer, you have to turn on “Use Printer Online” in installed network

printer driver and then you can use the printer.

4.4.1  Using Standard Windows Methods for LPR Printing Protocol

Windows Platform: Windows 2000, XP and 2003

1.   Open 

Printers and Faxes.  

2.   Right-click the printer for which you want to change settings, and then click 

Properties/ports. 

3.   Clear 

Enable bidirectional support and click Add port, and then click Standard TCP/IP Port from the 

dropdown and click

New port. 

4.   The 

Add Standard TCP/IP Printer Port Wizard will pop up and click Next. 

5.  In the Printer Name or IP Address box, enter the Host Name of the Server (default: NP3680) or IP 

address of the Server. In the Port Name box, enter your desired names or USB1_LPR or USB2_LPR for 
printer connected to USB1 port and USB2 port, respectively.