Netcomm np3680 Guía Del Usuario

Chapter14  Restore Factory Defaults

You may restore the Server’s default parameters by one of the following methods.

14.1  Using the Control Center

1.   Start the Control Center.

2.   If the tool finds Servers in your local area network, then you have to select a Server from the Server List. 

3.   Double click the highlight list and enter the Server’s administrator (default: 

admin) and password 

(default: 

admin).

4.   After you have logged in successfully, from the 

Server menu, select Maintenance. The Maintenance 

dialog appears. 

5.   Click 

Factory Default.

14.2  Using the Server’s Web Pages

1.   Go to the Server’s web page and click 

CONFIG. 

2.   Enter administrator (default: 

admin) and password (default: admin).

3.   Click 

Maintenance.

4.   Click 

Factory Default.

5.   Click 

Yes to confirm.

14.3  Using Init Button

Plug in the power adaptor while pressing the Init button until LED indicators of Power, USB1 and USB2 blink. 
After that, plug off the power adaptor and then plug in the power adapter again to restart the Server. Finally, 
the Server will operate using the Factory Default values.