Netcomm np3680 Guía Del Usuario

Chapter3

Basic Installation

3.1  Connecting the Hardware

1.   Make sure that your USB devices are switched off and that the Server’s Power Adapter is disconnected.

2.   Connect the USB devices to the USB ports with the USB cables. 

3.   Connect the Server to the network with a twisted-pair category 5 cable, 10baseT or 100baseTX. 

4.   Turn on the USB devices and make sure they are ready for use. 

5.   Connect the Power Adapter to the Server. The power indicator will light up and USB1 and USB2 

indicators will flash in turn. When the Link indicator lights up, the Server is correctly connected to the 
network. When the USB1 and USB2 indicators stop flashing, the Server is ready to work. 

6.   If you connect USB HP printers to the Server, please press the Init button for 3 seconds on the Server 

once to print a page of Server configuration report.