Garmin navtalk Manual De Propietario

Section 4

GPS Navigation

Waypoints

Mark Waypoint Page

Press and hold the ENTER key display the

“Quick Set’ menu, then highlight ‘Mark

Waypoint’ and press ENTER again to mark

your present location as a Waypoint.

Highlight and use the on-screen buttons
to save the waypoint and place it on the

waypoints list, display the waypoint on the

map, or to delete it.

The Goto button does not function for

Mark Waypoint as you are currently at the

destination, unless you are using the Map

Pointer to mark a Map ltem.

Waypoints

A waypoint is a location you have identified and stored in the unit.
The unit can store 500 waypoints in memory. Waypoints can be used as
destinations to ‘Goto’.

Marking your current location as a Waypoint:

1. Press and hold the ENTER key to display the ‘Quick Set’ menu. Highlight
‘Mark Waypoint’ and press ENTER to mark a waypoint for your current
location. It will automatically be assigned a 3-digit number.

If the GPS function is turned Off or the unit is acquiring satellites, the

‘Mark Waypoint’ option will appear gray and cannot be activated.

2. To change the name of the waypoint, use the ARROW keys

to highlight the waypoint name ﬁ eld. Follow instructions titled

“Entering Each Letter or Number” on page 10. You can enter a

total of 10 characters in the ﬁ eld. This waypoint name will appear

on the Map Page, when Map Page settings are conﬁ gured to do so.

3. To assign an identifying map symbol to a waypoint, use the

ARROW keys to highlight the ﬁ eld to the left of the waypoint

  name. Follow instructions titled “Selecting Data from Lists” on
  page 10 to select a symbol. The selected symbol will appear
  along with the name on the Map Page.

4. To save the waypoint highlight ‘OK’ and press the ENTER key.

5. If you do not want to save it as a new waypoint, press the

CLEAR key before pressing any other keys.

NvTlkGSMManual copy.indd 87

12/2/2002, 8:43:14 AM