Garmin 520 Guía Del Usuario
0
GPSMAP
®
500 Series Owner’s Manual
I
nStallInG
the
u
nIt
Step 2: Mount the Unit
You can mount your unit in one of two ways:
•
Surface Mount—mount the unit onto a bracket (included)
that attaches to the console or overhead.
• Flush Mount—use the optional flush mount kit to mount
the unit into a flat panel. See the “Appendix” for more
information.
Surface Mounting the Unit
The unit’s compact, waterproof case is suitable for mounting in
exposed locations or at the navigation station. The unit comes with a
tilt/swivel mounting bracket that can be used for console mounting.
Note: Be sure to mount the unit 95cm (37
Note: Be sure to mount the unit 95cm (37
1
/
2
")
Mounting the Bracket Assembly
Tools (not included)—drill, screwdriver (Phillips or standard), and
one of the following:
• Three #8 (4 mm) pan-head machine bolts with matching nuts
and washers and a
5
/
32
"
(5 mm) drill bit.
• Three #8 pan-head self-tapping screws and a
1
/
16
"
drill bit for
drilling starter holes.
Use a pan-head machine bolt or self-tapping screw to secure the
swivel base. If you use a screw with a countersunk head, you risk
damaging the mounting bracket.
OK