Garmin Edge 500 Guía Del Usuario

ANT+ Sensors

For a list of third-party ANT+ sensors 

that are compatible with the Edge, go 

For calibration instructions specific 

to your power meter, refer to the 

manufacturer’s instructions. 
Before you can calibrate your power 

meter, it must be properly installed and 

actively recording data.
1.  Press and hold 

. 

2.  Select 

 > 

 

> 

 > 

 > 

. 

3.  Keep your power meter active by 

pedaling until the message appears.

You can set seven custom power zones 

using Garmin Connect or Garmin 

Training Center. If you know your 

FTP (functional threshold power) 

value, you can enter it and allow the 

software to calculate your power zones 

automatically. 
1.  Press and hold 

.

2.  Select 

 > 

 > 

 > 

.

The non-zero data-averaging setting 

is available if you are training with 

an optional power meter. The default 

setting is to exclude zero values that 

occur when you are not pedaling. 
To turn the non-zero averaging on or 

off, press and hold 

, and select 

 > 

 > 

.