Casio XJ-A135 Manual De Usuario

On a Wireless Connection 3 window, click the function menu button and then click [Help] on the menu 
that appears.

On a Wireless Connection 3 window, click the function menu button and then click [About] on the 
menu that appears.

Perform either of the following operations.
 On a Wireless Connection 3 window, click the function menu button and then click [Exit] on the 

menu that appears.

 Click the close button in the upper right corner of a Wireless Connection 3 window.

This section explains how to use one of the three default SSIDs (casiolpj_default1, casiolpj_default2, 
casiolpj_default3) to establish a wireless LAN connection between the projector and a computer.

Note

 The initial default SSID for the projector is casiolpj_default1.
 When using multiple projectors for simultaneous projection in the same area, each one must 

be assigned a different SSID for identification purposes. Since there are only three default 
SSIDs, you have up to three projectors with default SSIDs in the same area operating 
simultaneously. For more information, see “Wireless LAN Connection when Using Multiple 
Projectors at the Same Time” (page 16).

Important!

 Note that only computer screen contents can be sent from your computer to the projector 

over a wireless LAN connection. Audio data cannot be sent.

 If you are running Wireless Connection 3 under Windows Vista or Windows 7, do not perform 

any of the operations that appear in the “User Account Control” message (such as software 
installation, new hardware connection, etc.) while there is a wireless connection between the 
computer and projector.