Garmin 400C Manual De Propietario
Fishfinder 400C Owner’s Manual
I
nstallIng
the
F
IshFInder
400c
Step 5: Test the Installation
To turn on your Fishfinder 400C for the first time, press and hold the POWER key until the unit beeps and turns on. Use the ROCKER
and the SElECt key and follow the screens to configure your Fishfinder 400C.
NOtE: Although it is possible to perform some checks with the boat trailered, the boat should be in the water to properly test the installation.
To configure your Fishfinder 400C for the first time:
Select a language.
Select a transducer
type.
Select units of
measure.
Select a color
scheme.
The Home screen appears after you select your configuration options. After 15 seconds of inactivity, the fishfinder automatically switches to
Full Screen.
NOtE: If the transducer is not detected, a “Transducer Disconnected, Sonar Turned Off” message appears.