Garmin 400C Manual De Propietario

c

ustomIzIng

 

the

 F

IshFInder

 400c

1.  Highlight

Keel Offset, and press SELECT.

2.  Use the

ROCKER to set the value of the keel offset.

3.  Press

SELECT to accept the number.

  NOtE: Press MENU to cancel your changes and return to the 

Transducer menu.

Calibrate Water Speed—to use a speed sensing transducer, use 

this menu to calibrate the speed sensor. If you are not using a speed 

sensing transducer, this menu does not appear.

1.  Highlight

Calibrate Water Speed, and press SELECT.

2.  Bring the boat to cruising speed. Note your top speed, and

then stop the boat.

3.  Highlight

OK, and press SELECT.

  NOtE: If the boat is not moving fast enough or the speed sensor 

is not registering a speed, a “Speed too low” message appears. 

Highlight OK, press SElECt, and safely increase boat speed. If 

you get the message again, stop the boat and make sure the speed 

sensor wheel is not stuck. If the wheel turns freely, check the 

cable connections. If you continue to get the message, contact 

Garmin Product Support.

To change the units of measure, on the Configure screen, highlight 

Units, and press SElECt.
Depth—select Feet (ft), Meters (m), or Fathoms (fa).
Water temp —select Fahrenheit (°F) or Celsius (°C) (with a 

compatible transducer).
Water Speed—select Miles/Hour (mh), Kilometers/Hour (kh), or Knots 

(kt) (with a compatible transducer).
Distance—select Statute (mi), Metric (km), or Nautical (nm) (with a 

compatible transducer).