Garmin 530 Guía Del Usuario
53
4 - FLIGHT PLANS
Flight Plan Catalog Options
The following options (some covered on the preceding pages) are available for the Flight Plan Catalog:
Activate Flight Plan? allows you to select the fl ight plan for navigation guidance, as described on page
51.
51.
Invert & Activate FPL? allows you to reverse the highlighted fl ight plan and select it for navigation
guidance, as described on page 51.
guidance, as described on page 51.
Create New Flight Plan? allows you to create a new fl ight plan, as described on page 49.
Crossfi ll? allows you to transfer a direct-to destination, the active fl ight plan, any stored fl ight plan or
user waypoints to a second 400-series or 500-series Garmin unit. Some crossfi ll operations can be done
automatically. If both units are set to “auto”, a change in the direct-to destination or active fl ight plan on
one unit can also be seen on the other.
automatically. If both units are set to “auto”, a change in the direct-to destination or active fl ight plan on
one unit can also be seen on the other.
To crossfi ll information between two 500-series (or 400-series) Garmin units:
1. From the Flight Plan Catalog, press MENU to display the Flight Plan Catalog Options.
2. Rotate the large right knob to select the “Crossfi ll?” option and press ENT.
3. Rotate the large right knob to select the “Method” fi eld.
4. Rotate the small right knob to select “Auto” or “Manual” and press ENT. “Auto” automatically transfers the
active fl ight plan or direct-to selection to another 400- or 500-series Garmin unit, without user in ter ven tion.
5. If “Manual” is selected, rotate the large right knob to select the “Transfer” fi eld, then rotate the small
right knob to select the type of information to transfer between units (Active Flight Plan, Flight Plan, All User
Waypoints or User Waypoint). When “Flight Plan” or “User Waypoint” is selected, a second fi eld appears to
the immediate right of the “Transfer” fi eld. Use the small and large right knobs to enter the number of the
fl ight plan or the name of the user waypoint you wish to transfer.
Waypoints or User Waypoint). When “Flight Plan” or “User Waypoint” is selected, a second fi eld appears to
the immediate right of the “Transfer” fi eld. Use the small and large right knobs to enter the number of the
fl ight plan or the name of the user waypoint you wish to transfer.
6. The “Cross-Side” fi eld allows you to designate the sending and receiving units in a crossfi ll operation. Rotate
the large right knob to select the “Cross-Side” fi eld, then rotate the small right knob to select “To” or
“From”. Press ENT to confi rm the selection. (For more information on Crossfi ll, see page 136.)
“From”. Press ENT to confi rm the selection. (For more information on Crossfi ll, see page 136.)
7. Rotate the large right knob to highlight “Initiate Transfer?” and press ENT to transfer the selected data.
“Activate Flight Plan?” selects the highlighted fl ight
plan and uses it for navigation guidance. “Invert &
Activate FPL?” reverses the order of waypoints in the
fl ight plan, then selects it for navigation guidance.
plan and uses it for navigation guidance. “Invert &
Activate FPL?” reverses the order of waypoints in the
fl ight plan, then selects it for navigation guidance.
Flight Plan Catalog Options
Once “Initiate Transfer?” is selected, a progress bar
at the bottom of the page indicates the status of the
crossfi ll transfer until completed.
at the bottom of the page indicates the status of the
crossfi ll transfer until completed.
i-60.indd 53
4/11/2003, 8:56:48 AM