Casio XJ-A230 Guía Del Usuario

Input Signal

R C V H D W U N Source 

Specific

This sub-menu item shows the currently selected input signal 
(RGB, Component, VIDEO, HDMI (PC), or HDMI (DTV)). “- - - -” is 
indicated here when there is no input signal.

Signal Name

R C V H D W U

Source 
Specific

This sub-menu item shows the signal name of the signal being 
input to the projector. For details about signal names, see “Signal 
Name” under “Supported Signals” on page 48.

Resolution

R

H

Source 
Specific

This sub-menu item appears only when RGB is the input signal. It 
shows the number of vertical and horizontal pixels of resolution of 
the RGB or HDMI (PC) input signal.

Horizontal 
Frequency

R C V H D

Source 
Specific

This sub-menu item shows the horizontal frequency of the input 
signal.

Vertical 
Frequency

R C V H D

Source 
Specific

This sub-menu item shows the vertical frequency of the input 
signal.

Scan System

R C

H D

Source 
Specific

This sub-menu item appears only when RGB, Component, 
HDMI (PC), or HDMI (DTV) is the input signal, and shows the scan 
system of the input signal. The scan system is interlace or non-
interlace for an RGB or HDMI (PC) signal input, and interlace or 
progressive for a component or HDMI (DTV) signal input.

Lamp Time

R C V H D W U N Single

This sub-menu item shows the cumulative number of hours the 
current lamp has been used to date.

Unit Operating 
Time

R C V H D W U N Single

This sub-menu item shows the cumulative operating time of this 
unit. This time cannot be initialized.

Restore All 
Defaults

R C V H D W U N Single

This sub-menu returns all sub-menu items on all main menus to 
their initial default settings. This operation can be performed 
regardless of the currently selected input source and regardless 
of whether or not a signal is currently being input. For details 
about this procedure, see “To restore all settings on the setup 
menu to their initial factory defaults” on page 25.