Garmin 130 Manual De Propietario
A
B
Going to a Destination
The GPSMAP 130 provides four ways to navigate to a destination: GOTO,
MOB, TracBack and route navigation. The most basic method of selecting a
destination is the GOTO function, which lets you select a waypoint as your desti-
nation and quickly sets a direct course from your present position. The G key
can be used in three ways: from a list of waypoints, graphically from the map dis-
play and from a list of GOTO options. Pressing the G key once displays a list of
all waypoints in memory, from which you can select a single destination waypoint.
destination is the GOTO function, which lets you select a waypoint as your desti-
nation and quickly sets a direct course from your present position. The G key
can be used in three ways: from a list of waypoints, graphically from the map dis-
play and from a list of GOTO options. Pressing the G key once displays a list of
all waypoints in memory, from which you can select a single destination waypoint.
To activate a GOTO from the waypoint list:
1. Press the
G
key.
2. Select a waypoint and press
T
.
Selecting a GOTO Graphically
Pressing the G key twice allows you to graphically select an on-screen way-
point, navaid or cursor position as a destination. A graphical GOTO may be used
to select one of three options from the map display: an existing waypoint, an on-
screen navaid, or a cursor position. If you are selecting a navaid or a new position
as the GOTO destination, the GPSMAP 130 will automatically create or move the
waypoint named ‘MAP’ at the navaid or map position.
to select one of three options from the map display: an existing waypoint, an on-
screen navaid, or a cursor position. If you are selecting a navaid or a new position
as the GOTO destination, the GPSMAP 130 will automatically create or move the
waypoint named ‘MAP’ at the navaid or map position.
To activate a GOTO from the map display:
1. Press the
G
key twice.
2. To select an existing user waypoint, highlight the waypoint on screen and press
T
.
3. To select a navaid, highlight the navaid on screen and press
T
. The GOTO new way-
point page will appear, displaying the navaid position as a ‘MAP’ waypoint, with the
navaid symbol and text as the default icon and waypoint comment. Press
navaid symbol and text as the default icon and waypoint comment. Press
T
to save
the waypoint and begin navigation.
4. To select a cursor position as your destination, move the arrow cursor to the desired
position and press
T
. The GOTO new waypoint page will appear and display the posi-
tion as the ‘MAP’ waypoint. Press
T
to save the waypoint and begin navigation.
43
A. Press GOTO once to select a destination from a list
of waypoints.
B. Press GOTO twice to select a destination waypoint
with the map cursor. If you are not selecting an
existing waypoint as your destination, a new way-
point named ‘MAP’ will be created. Keep in mind
that the MAP waypoint will be overwritten for each
MAP GOTO. This allows you to navigate to on-
screen navaids without permanently storing the
navaid as a waypoint. If you want to save the MAP
waypoint, rename it following the steps on page 39.
existing waypoint as your destination, a new way-
point named ‘MAP’ will be created. Keep in mind
that the MAP waypoint will be overwritten for each
MAP GOTO. This allows you to navigate to on-
screen navaids without permanently storing the
navaid as a waypoint. If you want to save the MAP
waypoint, rename it following the steps on page 39.
SECTION
7
GOTO/MOB
Selecting a
GOTO Destination
gps 130 7/23/98 9:22 AM Page 43