Garmin 521s Guía Del Usuario

Descargar
Página de 72
40 
GPSMAP 400/500 Series Owner’s Manual
Configuring the Chartplotter
If the turns in the Auto Guidance line are too wide, from the 
Home screen, select 
Configure
 > 
Preferences
 > 
Navigation
 
Auto Guidance
 > 
Shoreline Distance
 > 
Nearest
.
10. If you selected 
Nearest or Farthest in step 9, review the 
placement of the Auto Guidance line. Determine whether the line 
safely avoids known obstacles, and whether the turns enable 
efficient travel.
11. Repeat steps 1-10 at least once more, using a different 
destination each time, until you are familiar with the functionality 
of the Shoreline Distance setting.
Configuring Communications Settings
  To change the communications settings from the Home screen, 
select 
Configure 
Communications
.
Serial Port 1—configures the input/output format for serial port 1 to 
use when connecting your chartplotter to external NMEA devices, a 
computer, or other Garmin devices.
Serial Port 2 (if supported)—configures the input/output format for 
serial port 2 to use when connecting your chartplotter to external 
NMEA devices, a computer, or other Garmin devices.
garmin data Transfer—supports the input or output of 
Garmin-proprietary data for communicating with Garmin 
software.
garmin Remote Sonar Transfer (GPSMAP 
420/450/520/550/525/555)—supports the input or output of 
Garmin-proprietary sonar data for communicating with Garmin 
software.
NMEa Standard—supports the input or output of standard 
NMEA 0183 data, DSC, and sonar NMEA input support for the 
DPT, MTW, and VHW sentences.
NMEa High Speed—supports the input or output of standard 
0183 data for most AIS receivers.
NMEa 0183 Setup—enable or disable NMEA 0183 output 
sentences for sounder, route, system, and Garmin NMEA settings.
To enable or disable NMEA 0183 output sentences:
1.  From the Home screen, select 
Configure
 > 
Communications
 > 
NMEA 0183 Setup
.
2.  Select a setting (
Sounder
Route
System
, or 
Garmin
).
3.  Select the NMEA 0183 output sentence to toggle the output on or 
off.
Posn. Precision—adjust the number of digits (Two digits
Three digits, or four digits) to the right of the decimal point 
for transmission of NMEA output.
waypoint ids—determine how the unit identifies waypoint 
identifiers (Names
 
or Numbers).