Garmin 3600 Guía De Instalación

Step 1: Charge your iQue

Plug the HotSync

cradle’s USB connector into a USB port on your computer.

Connect the AC adapter to the HotSync cradle cable. Plug into a standard

wall outlet.
Place the iQue in the cradle by aligning it with the angle of the cradle and

sliding it down. To remove the iQue, pull the unit forward (in a more vertical

position) and lift the iQue from the cradle.
Charge the iQue for three full hours before it is used. The Green LED at the

top of the unit is lit when the unit is charging or using external power.

Step 2: Set up the iQue

Press the Power button (top center) to turn the unit on. Follow the setup

instructions on the iQue screen.

Step 3: Install Palm

™

Desktop

Remove the DVD-ROM from the case and insert it into your computer’s DVD-

ROM drive. If the startup ﬁle does not run automatically, click the Windows

Start button and select Run…. Type your DVD-ROM’s drive followed by

“Setup” (for example, “E:\Setup”). Click OK.
When the Main Menu is displayed, select Install Software. Select

Install

Palm Desktop. Follow the steps on your computer screen to complete the

installation.

Step 4: Perform a HotSync

operation

Note: If you do not perform a HotSync operation at this time, you will

encounter difﬁculties. Perform a HotSync operation NOW to ensure a

complete and proper set up.
With the unit in the cradle, press the HotSync button on the front of the

cradle. Follow the steps on your computer screen to complete the installation.

After the HotSync operation is complete, the iQue beeps. Tap

Reset on the

iQue screen.

Step 5: Install maps to your computer

On the install software menu, select Install Detailed Maps. Follow the

instructions on your computer screen. Click Finish.

Step 6: Unlock the maps

Select Yes at the Do you have a 25-character unlock code? prompt.

Enter the unlock code listed on the yellow sheet packaged with your unit.

Follow the instructions on your computer screen to unlock the maps.

Step 7: Register your iQue

Garmin recommends that you register your new iQue. Registering your iQue

enables Garmin’s Product Support to assist you if needed and provides you

added beneﬁts such as preferred rate map updates.
You need to be connected to the Internet to register your unit. Follow the on-

screen prompts and enter your registration code when prompted.