Garmin 200 Guía Del Usuario

Appendix

Use the enclosed mounting disk to 

mount your unit to the dashboard and 

comply with certain state regulations. 

CaUTiOn: The permanent 

mounting adhesive is 

extremely difficult to remove 

after it is installed. 

1.  Clean and dry the dashboard 

where you are placing the 

disk.

2.  Remove the backing from the 

adhesive on the bottom of the 

disk.

3.  Place the disk on the 

dashboard.

4.  Remove the clear plastic 

cover from the top of the disk.

5.  Place the suction cup mount 

on top of the disk. Flip the 

lever down (toward the disk).

You can purchase additional 

MapSource map data from Garmin 

and load the maps in your nüvi 

internal memory or on an optional 

memory card. 
To determine the versions of the 

maps that are loaded on your nüvi, 

open the Menu page. Touch 

> 

> 

 > 

. Check 

http://my.garmin.com/maps/updates 

.htm 

to see if an update for your 

map software is available. To enable 

additional maps, you need your unit 

ID (see 

) and serial number 

(located near the power connector). 
To load maps or waypoints in your 

nüvi memory or on your memory 

card, select the name for your nüvi