Knoll hd102 Manual De Usuario
23
CCS: (Cross-Color Suppression) processes the signal to remove any color information from the luma portion
of the signal. It is On for all composite signals, and can be turned off for S-video and interlaced component
signals.
Sharpness: (video sources only) changes the
clarity of the edges of a video image. Select a sharpness
setting.
of the signal. It is On for all composite signals, and can be turned off for S-video and interlaced component
signals.
Sharpness: (video sources only) changes the
clarity of the edges of a video image. Select a sharpness
setting.
Color Space: This option applies to computer
and component video sources. It allows
you to select a color space that has been
specifically tuned for the input signal. When
Auto is selected, the projector automatically
determines the standard. To choose a different
setting, turn off Auto, then choose RGB for
computer sources, choose either REC709 or
REC601 for component video sources.
Color Temperature: changes the intensity of the colors.
Select a value.
Color Control: allows you to individually adjust the
gain (relative warmth of the color) and the offset
(the amount of black in the color) of the red,
green, and blue colors.
Video Standard: when it is set to Auto, the projector
attempts to automatically pick the video standard based
on the input signal it receives. (The video standard
options may vary depending on your region of the
world.) If the projector is unable to detect the correct
standard, the colors may not look right or the image may
appear “torn.” If this happens, manually select a video
standard by selecting NTSC, PAL, or SECAM from the
Video Standard menu.
Overscan: (video sources only) removes noise around
the video image.
Sync Threshold Adjust: If a hardware device, such as a DVD player, is not syncing properly with the
projector, select this option to help it to sync when connected to the projector. The following four (4) options
are for computer sources only.
Phase: adjusts the horizontal phase of a computer source.
attempts to automatically pick the video standard based
on the input signal it receives. (The video standard
options may vary depending on your region of the
world.) If the projector is unable to detect the correct
standard, the colors may not look right or the image may
appear “torn.” If this happens, manually select a video
standard by selecting NTSC, PAL, or SECAM from the
Video Standard menu.
Overscan: (video sources only) removes noise around
the video image.
Sync Threshold Adjust: If a hardware device, such as a DVD player, is not syncing properly with the
projector, select this option to help it to sync when connected to the projector. The following four (4) options
are for computer sources only.
Phase: adjusts the horizontal phase of a computer source.
Tracking: adjusts the vertical scan of a computer source.
Horizontal/Vertical Position: adjusts the position of a computer source.
White Peaking: increases the brightness of whites that are near 100 percent.