Sonance fms530 Guía Del Usuario

10. Fit the grilles onto the speakers.

PAINTING THE SPEAKERS AND

GRILLES

All FastMount speakers feature a tough polypropylene

enclosure that can be painted. Sound Advance recommends

using a weather-resistant outdoor paint and a spray gun to

paint the FastMount speakers.
1. If they have already been installed, remove the grilles from

the speakers.

2. To protect the speaker driver units during painting, place

the grilles on a piece of cardboard and trace around their

outlines. Then cut the cardboard just inside of the trace line

and fit these “paint plugs” into the speakers’ baffles. (Be

careful not to damage the driver components while fitting

the paint plugs.)

3. Paint the speakers the desired color according to the paint

manufacturer’s instructions. Remove the paint plugs after

the paint has thoroughly dried.

4. Paint the grille separately from the speaker using very thin paint

(5:1 ratio). Avoid plugging the grille holes with excess paint.

PIVOTING THE SPEAKERS

You can rotate the speaker in the bracket

to direct the sound towards the listeners.
1. Unlock the slide locks on the speaker

pivots by moving them towards the rear

of the speaker.

2. Rotate the speakers to

the desired position.

3. Lock the slide locks by

moving them towards
the front of the speaker.

SPECIFICATIONS

FMS860B / FMS860W

Tweeter:

1” (25mm) Polyurethane dome

Woofer:

8” (203mm) One-piece black

Polypropylene cone with a rubber

surround

Frequency Response:

45Hz – 20kHz ±3dB

Impedance:

6 ohms nominal; 4 ohms minimum

Power Handling:

5 watts minimum;

125 watts maximum

Sensitivity:

91dB SPL (2.83V/1 meter)

Grille Material:

Perforated aluminum

Dimensions (H x W x D): 14” x 9” x 9¼”

(356mm x 229mm x 235mm)

Net Weight:

13 lbs (6.0kg) each

FMS660B / FMS660W

Tweeter:

1” (25mm) Polyurethane dome

Woofer:

6½” (165mm) One-piece black

Polypropylene cone with a rubber

surround

Frequency Response:

55Hz – 20kHz ±3dB

Impedance:

8 ohms nominal; 6 ohms minimum

Power Handling:

5 watts minimum;

80 watts maximum

Sensitivity:

89dB SPL (2.83V/1 meter)

Grille Material:

Perforated aluminum

Dimensions (H x W x D): 12” x 7½” x 7

”

(305mm x 191mm x 181mm)

Net Weight:

9 lbs (4kg) each

FMS530B / FMS530W

Tweeter:

1” (25mm) Polyurethane dome

Woofer:

5¼” (133mm) One-piece black

Polypropylene cone with a rubber

surround

Frequency Response:

65Hz – 20kHz ±3dB

Impedance:

8 ohms nominal; 6 ohms minimum

Power Handling:

5 watts minimum;

70 watts maximum

Sensitivity:

88dB SPL (2.83V/1 meter)

Grille Material:

Perforated aluminum

Dimensions (H x W x D): 10¼” x 6½” x 6”

(260mm x 165mm x 153mm)

Net Weight:

7.5 lbs (3.5kg) each

UNLOCK

(towards rear

of speaker)

LOCK

(towards front

of speaker)

9. Attach the
connector cover

10. Attach
the grille

I N S T R U C T I O N M A N U A L

F A S T M O U N T

S E R I E S

WEATHER-RESISTANT SPEAKERS