Aethra d2061 Manual De Usuario
ADSL TESTER D2061
USER’S MANUAL
3.9.2. Running a call test
When you have defined the setup for the call test, continue as follows:
1
Select ‘Use this setup for testing’ in the first SETUP page.
2
Connect the instrument as displayed on the screen and
press the RIGHT CURSOR key.
press the RIGHT CURSOR key.
3
Start the CALL test.
Note that:
The LED RUN goes on, the key LOOP appears at the left bottom of the screen and
the START key turns into STOP. Use this key to interrupt the test.
the START key turns into STOP. Use this key to interrupt the test.
The test results appear on the screen.
POTS
4
Scroll through the result pages.
52
CHAPTER 3 - PERFORMING A MANUAL TEST